Manual
25
WPS-100-DVR-8CH Installation and Users Manual
© 2012 Wirepath Surveillance
•CONNECT/DISCONNECT
If the backup device is disconnected (as shown in screen capture above), plug the USB device into the
USB 2.0 port and then press ENTER on the front panel of the DVR or on the remote control. Alternatively
use the mouse to click on the CONNECT button. If the device is already plugged in, press ENTER on the
front panel of the DVR or on the remote control to connect the device. Alternatively use the mouse
to click on CONNECT. It is recommended to select the DISCONNECT option before unplugging the
USB device.
Note 1: Before using a USB drive, please format it to FAT32 le system using Windows.
Note 2: The backup device must be connected by the system software before it can be used to read/
write. If it fails to connect, unplug the device and then plug the device into the USB port again.
Note 3: Some backup devices may have compatibility problems. See the list of tested devices below.
TESTED USB 2.0 DEVICES
•MacpowerAlumniPrefectUSB2.0-PF-U2MS
•TranscendJetFlash150/V60Series,JetFlashV338GB
•ApacerHandyStenoAH220
•Preteci-DiskWave512M-Black
•KingstonDataTravelerUSBFlashDriver(DTI/512FE)
•KingstonDataTravelerDT1008GB
•SanDiskCruzermicroUSBFlashDriver
•SandiskCruzerTitanium4GB,CruzerContour4GB
•SonyMICROVAULTClassicSeries
•OCZATV4GB,Rally24GB
TESTED DVD DRIVES
•AsusDRW-1608PSeries
•PioneerDVR-A11,DVR-X152Series
•BenQEW200GSeries
•LITEONLightScribeDVDWriterSHM-165H6S,20XDVDWriterDX-20A4P
•SonyDVD/CDRewritableDriveModelDRX-810ULSeries
•NECDVD/CDRewritableDriveModelND-4550ASeries
•HPdvd9404eExternal18XSuperMultiDVDWriterSeries
•BACKUP
Onceadeviceisconnected,usethe▲▼◄►buttonsonthefrontpaneloftheDVRortheremotecontrol
to select BACKUP for the corresponding USB device and press ENTER. Alternatively use the mouse to select
thisbutton.Enterthedirectorytobackupthecongurationsto.Thisbuttonwillremainwhiteincolorand
unavailable until a USB device is connected.
•RESTORE
Onceadeviceisconnected,usethe▲▼◄►buttonsonthefrontpaneloftheDVRortheremotecontrol
to select RESTORE for the corresponding USB device and press ENTER. Alternatively use the mouse to select
thisbutton.Enterthedirectorytorestorethecongurationsfrom.Thisbuttonwillremainwhiteincolorand
unavailable until a USB device is connected.