Manual

WPS-100-DVR-8CH Installation and Users Manual

•GOTOPRESET

The GOTO Preset feature works in conjunction with the Camera To Gosettinganddenesthe

preset position the Camera To Go PTZ camera will go to when video signal is lost for this camera.

For more details about preset positions for PTZ cameras, refer to Section 7.

  •PRE-RECORD

Pre-RecorddeneshowmuchtimetheDVRwillrecordbeforevideolossisdetected.ThePre Record FPS

set in Section 6.2 determines the frame rate of this recording. Press +/- buttons on the front panel of the

DVR or the remote control to adjust the value from 0 to 10 seconds. Alternatively use the mouse to adjust

this setting.

Note that the actual pre-record time may be shorter than the value set if the total size of the pre-record

video exceeds the pre-record video buffer.

  •ALARMOUT

   DenewhichAlarm Output will be triggered when video loss for this camera is detected. Press +/-

buttons to select N/A for none or either of the Alarm Outputs (1 for NC or 2 for NO).

  •BUZZER

By default, the internal buzzer is enabled to sound when video loss for the camera is detected.

Highlight this setting and press ENTER or +/- to enable or disable this item. Alternatively use the mouse

to left-click on this item.

  •  LOG

By default, the DVR will log when video loss is detected to the Event Log (see Section 8.2). Highlight

this setting and press ENTER or +/- to enable or disable this item. Alternatively use the mouse to

left-click on this item.

  •SCREENMESSAGE

By default, the DVR will display a video loss message in the System Status Bar when video loss is detected

for this camera. Highlight this setting and press ENTER or +/- to enable or disable this item. Alternatively

use the mouse to left-click on this item.

  •E-MAIL

   ThisDVRcansendanemailmessagetoapredenedemailaddressintheeventvideolossisdetected

for this camera. Highlight this setting and press ENTER or +/- to enable or disable this item. Alternatively

use the mouse to left-click on this item. The default setting is disabled. See Section 6.10.1 for more

information on e-mail.

  •FTP

This DVR can send the recorded video loss event for this camera to a FTP server. Highlight this setting

and press ENTER or +/- to enable or disable this item. Alternatively use the mouse to left-click on this

item. The default setting is disabled.