Manual

WPS-100-DVR-8CH Installation and Users Manual

     •SEQ/CALL

Press these buttons on the front panel of the DVR or remote control to decrease (SEQ) or

      increase(CALL)theSensitivityofthemotiondetectionareaofthiscamerafrom1–10(1isleast

sensitive and 10 is most sensitive). Alternatively use the mouse to select this icon and adjust the

sensitivity. We recommend that the default setting (3) be used to start and adjusted as needed.

     •Volume+/-( +)

Press these buttons on the remote control to increase or decrease the number of grids required

to detect motion before the DVR will trigger motion detection recording and any associated

events. Alternatively use the mouse to select this icon and adjust the number of grids.

     •SEARCH

Press this button on the front panel of the DVR or remote control to test the motion detection

of this camera. Grids in green indicate that area that will detect motion. When motion is

detected, these grids will change in color to red. Press this button again to exit testing.

Alternatively use the mouse to select this icon to enter and exit testing mode.

     •ESC

Press the ESC button on the front panel of the DVR or remote control to escape from this menu

and return to the main menu. Alternatively use the mouse to exit the sub menu by clicking on

the “X.”Ifthecontentsinthismenuhavebeenmodied,aSave dialog box will be displayed

requesting the user to save the changes. Press ENTER on the front panel of the DVR or remote

control to exit and save, ESC to exit without saving. Another method to escape is to use the

      mouseto“right-click,”andexitthesubmenu.

6.3 ALARM SETUP

The Alarm Setupallowstheadministratortodenetheattributesforeachalarminputandtheactionsifitis

triggered. Up to four alarm inputs such as motion detectors or door contacts can be connected to the DVR.

In the Setup Menu

display,press▲▼◄►onthefrontpaneloftheDVRorontheremotetochangethe

highlighted option to Alarm and then press ENTER to display Alarm Setup display as shown.