Manual

WPS-100-DVR-8CH Installation and Users Manual

To navigate and operate this menu:

 •▲▼◄►

Press these buttons on the front panel of the DVR or remote control to select an item.

Alternatively use the mouse to select an item.

 •MODE

Press this button on the front panel of the DVR or the remote control to Format/Clear the HDDs as described

in Section 6.6.1. Alternatively use the mouse to select this option.

 •SEQ

Press this button on the front panel of the DVR or the remote control to enter Advanced HDD Setup as

described in Section 6.6.2. Alternatively use the mouse to select this option.

 •ESC

Press the ESC button on the front panel of the DVR or remote control to escape from this menu and

return to the main menu. Alternatively use the mouse to exit the sub menu by clicking on the “X.”

  Ifthecontentsinthismenuhavebeenmodied,aSave dialog box will be displayed requesting the

user to save the changes. Press ENTER on the front panel of the DVR or remote control to exit and save,

ESCtoexitwithoutsaving.Anothermethodtoescapeistousethemouseto“right-click,”andexitthe

sub menu.

Thefollowingisabriefdescriptionforeachiteminthesubmenuanditsspecicoperations:

 •Size(GB)

The total hard drive storage capacity in GBs (gigabytes) for the Alarm Record partition and Normal

Record partition respectively. Refer to Section 6.6.1 for more detailed information and setup of

each individual hard drive partition.

Note: if the total Alarm Record partition size is zero, alarm video and audio will be recorded in Normal

Record partition. Conversely, if the total Normal Record partition size is zero, normal video and audio

will be recorded in Alarm Record partition.

 •AutoOverwrite

By default, the DVR will automatically overwrite recorded video and audio hard drive reaches its capacity.

WARNING - If Auto Overwrite is disabled and the hard drive capacity reaches its maximum, the system will

NOT overwrite recorded video and audio. Therefore the DVR will NOT record Alarm or Normal video or

audio until the user presses the Alarm Reset button.

Press ENTER or +/- on the front panel of the DVR or the remote control to disable this setting. Alternatively

use the mouse to make this change.

 •HDDFullAction

If Auto Overwrite is disabled, the DVR can sound the buzzer, log the event and email an alert when the

hard drives reaches its maximum capacity. Press ENTER or +/- on the front panel of the DVR or the remote

control to disable this setting. Alternatively use the remote control to make this change