Manual

WPS-100-DVR-8CH Installation and Users Manual

To navigate and operate this menu:

 •▲▼◄►

Press these buttons on the front panel of the DVR or remote control to select an item.

Alternatively use the mouse to select an item.

 •ESC

Press the ESC button on the front panel of the DVR or remote control to escape from this menu and

return to the main menu. Alternatively use the mouse to exit the sub menu by clicking on the “X.”

  Ifthecontentsinthismenuhavebeenmodied,aSave dialog box will be displayed requesting the

user to save the changes. Press ENTER on the front panel of the DVR or remote control to exit and

save, ESCtoexitwithoutsaving.Anothermethodtoescapeistousethemouseto“right-click,”and

exit the sub menu.

Thefollowingisabriefdescriptionforeachiteminthismenuanditsspecicoperations:

 •DEVICETYPE

Press the +/- buttons on the front panel of the DVR or on the remote control to change the device

type to PTZ, Keyboard, PTZ+Keyboard or N/A (Not Available). Alternatively use the mouse to select

the appropriate setting.

 •MODEL

PTZ model (for PTZ and PTZ+Keyboard) refers to the type of the connected devices. The PTZ models

supported include Pelco D Protocol Dome, Samsung SCC-641P, Kalatel Cyber Dome, PIH-series, Dynacolor,

Bosch AutoDome, Video Trek, etc. The Keyboard models supported include Terminal (EX. VT-100)

and Control Protocol. Press +/- buttons to change the supported model (or protocol).

Note: If the PTZ+Keyboard is selected for Device Type, the Keyboard model is always Control

Protocol, and the other settings (Baud Rate, Data Bit, Stop Bit, and Parity) are the same as the PTZ Model

selected. In addition, be sure that the Keyboard Control Protocol and the PTZ Protocol won’t conict with

each other.

 •BAUDRATE

Press +/- buttons on the front panel of the DVR or on the remote control to change the Baud Rate.

Alternatively use the remote control to change this setting.

 •DATABIT

Press +/- buttons on the front panel of the DVR or on the remote control to change the Date Bit.

Alternatively use the remote control to change this setting.

 •STOPBIT

Press +/- buttons on the front panel of the DVR or on the remote control to change the Stop Bit.

Alternatively use the remote control to change this setting.

 •PARITY

Press +/- buttons on the front panel of the DVR or on the remote control to change the parity to Odd,

Even, or None. Alternatively use the remote control to change this setting.

 •DVR/CAMERAID

Set the PTZ IDfortheDVR.ItmustnotconictwithotherdevicesconnectedtotheRS485network.Press+/-

buttons to change the ID. Alternatively use the remote control to change this setting.