Manual

54
WPS-100-DVR-8CH Installation and Users Manual
6.10 NETWORK SETUP
The Network Setup allows the administrator to setup all Ethernet network related parameters. Consultation with
the network administrator may be required to set these parameters correctly.
IntheSetupMenudisplay,press▲▼◄►onthefrontpaneloftheDVRorontheremotetochangethehigh-
lighted option to Network, and then press ENTER to display Network Setup as shown.
To navigate and operate this menu:
•▲▼◄►
Press these buttons on the front panel of the DVR or remote control to select an item.
Alternatively use the mouse to select an item.
•ESC
Press the ESC button on the front panel of the DVR or remote control to escape from this menu and
returntothemainmenu.Alternativelyusethemousetoexitthesubmenubyclickingonthe“X.”
Ifthecontentsinthismenuhavebeenmodied,aSave dialog box will be displayed requesting the
user to save the changes. Press ENTER on the front panel of the DVR or remote control to exit and
save, ESCtoexitwithoutsaving.Anothermethodtoescapeistousethemouseto“right-click”and
exit the sub menu.
Thefollowingisabriefdescriptionforeachiteminthesubmenuanditsspecicoperations.
Please follow the Text Input method described in Section 4.1 to modify these items. Alternatively use the mouse
and the pop-up keyboard to enter these settings. Consultation with the network administrator may be required
for these settings.
•NETTYPE
Press +/- buttons on the front panel of the DVR or on the remote control to change the Net Type.
Alternatively use the mouse to change this setting. Options include: Static IP, PPPoE, or DHCP. DHCP
can only be used for intranet (LAN) access, while Static IP and PPPoE can be used for both internet
&intranetaccess.ThedefaultsettingisDHCP.
•IPADDRESS
Enter an Ethernet IP AddressfortheDVR.ThisaddressshouldnotconictwithanyotherIPaddress
on the LAN.
•NETMASK
Enter the Net Mask for the IP address.
•GATEWAY