Manual

86
WPS-100-DVR-8CH Installation and Users Manual
9.3.3 NETWORK
The Network Setup allows the administrator to setup all Ethernet network related parameters. Consultation with
the network administrator may be required to set these parameters correctly.
Thefollowingisabriefdescriptionforeachiteminthismenuanditsspecicoperations:
•NetType
Select the type of network connection of the DVR to the network (DHCP, Static IP or PPPoE). DHCP is enabled
by default but a Static IP is recommended.
•IP Address
EnteranEthernetIPaddressfortheDVR.ThisaddressshouldbestaticandnotconictwithanyotherIPaddress
on the LAN.
•Net Mask
Enter the Net Mask for the IP address.
•Gateway
Enter the Gateway IP address for the system.
•DNS
If using DNS, enter the Domain Name Server address for the system. (Same address as Default Gateway)
•Username
If PPPoE is used, enter the username for the system.
•Password
If PPPoE is used, enter the password for the system.
•DDNS Type
Starting with Version 7.75.53 a new selection will appear for WirepathDNS. It is strongly recommended that this
optionisusedtosimplifyconguration.
Using the WirepathDNS is easy. Select WirepathDNS from the list and enter the client name or other unique
stringintheURL.WhenexitingtheNetworkmenu,conrmthechanges.ADDNSserviceissetupautomatically.
See IE Interface Setup in Appendix E–WirepathDNS Setup for details on using WirepathDNS.
•URL
EntertheDDNSURLifDDNSisused.–EnterClientNameorSystemNametoidentifytheDVR.