Manual

WPS-100-DVR-8CH Installation and Users Manual

•DDNSUsername

EntertheDDNSusernameifDDNSisused.–NotusedunlessanexistingDDNSotherthanWirepathDNSserviceis

congured.

•DDNSPassword

EntertheDDNSpasswordifDDNSisused.–NotusedunlessanexistingDDNSotherthanWirepathDNSserviceis

congured.

•WAPPictureQuality

WAP (Wireless Application Protocol) is a simple standard for remote devices (such as Smartphones) to

access the DVR. See Section 9.6 for more information on WAP.

•VideoStream

Video Stream (Dual Streaming) allows the user to choose the resolution and speed the video is delivered to

the remote device (see Section 9.4). This is especially helpful for remote devices on slower networks. Reducing

resolution sent to these devices will speed up the delivery of the video. To enable Dual Streaming, select one of

the four levels of QCIF (Fair is the lowest quality while Superne is the highest quality). If Dual Streaming is used,

the total system recording rate will be reduced. The default value is Record, which means that Dual Streaming is

not enabled and the output of the DVR to remote devices will match the Best Rec Resolution set in Pre Camera

(See Section 9.3.4).

Note: To use Dual Streaming in Internet Explorer, the user must select Extra Video Stream option in the Modify

menu of the Device List of the remote PC (See Section 9.4).

- QCIF Fair

–LowestQCIFResolution-

- QCIF Normal–MediumQCIFResolution

- QCIF Fine–HighQCIFResolution

- QCIF Super Fine–BestQCIFResolution