Manual

88
WPS-100-DVR-8CH Installation and Users Manual
9.3.4 PRE CAMERA
Pre-Camerasetupallowstheadministratortodenefundamentalattributesforconnectedcameras.
Thefollowingisabriefdescriptionforeachiteminthismenuanditsspecicoperations:
 •BESTRECRESOLUTION
Select the record resolution for all the cameras connected to the system. This is a global setting.
Select D1 for the highest resolution (720x480), Half D1 for medium resolution (720x240), or CIF for lower
resolution (360x240).
Note: While higher resolution offers more detail, it does require more hard drive storage space and higher
network bandwidth capacity for streaming.
 •WATERMARK
An invisible, digitally embedded security feature to protect against tampering of recorded content.
If a downloaded .h264 clip has been altered, the PC-based playback software will alert the user with
a message upon playback. The default setting is enabled.
 •MAXID
Select the maximum number of cameras connected to the DVR.
 •COMPRESSION
  ThisDVRusesthelatestcompressionformat(.h264)forthemostefcientuseofstoragespaceand
  streamingexibility.TheCompressionsettingallowstheadministratortofurthercompressstreaming
video to account for slow or bandwidth-limited networks. Choose Normal for normal compression or
select High to enable the second stream of the Dual Streaming (See Section 9.4). The High setting will
reduce the resolution of the second stream to one of the four QCIF levels as set in the Video Stream setting
in the Network tab (Section 9.3.3).
 •INSTALLED
Enable or disable cameras in the system. The default setting is enabled.
 •PTZID
Enter the Pan/Tilt/Zoom ID of corresponding camera if it’s a PTZ camera. The PTZ ID should be unique
and must be consistent with the setting in the PTZ-capable camera. Please refer to the manual for the
camera regarding the proper PTZ ID setting.