Manual
89
WPS-100-DVR-8CH Installation and Users Manual
© 2012 Wirepath Surveillance
9.3.5 CAMERA
The Camerasetupallowstheadministratortodeneadditionalattributesforeachcamera
Thefollowingisabriefdescriptionforeachiteminthismenuanditsspecicoperations:
•TITLE
Name each camera with a unique identifying name up to eight characters maximum.
•MOTIONDETECTION
Enable or disable motion detection for the selected camera. Default setting enables this feature.
Note: This has no effect on Smart Search functions.
•COVERT
If a camera’s covert function is enabled, the video of this camera can only be seen if the user has logged
in as an Administrator. The default setting is disabled.
•CALLBYEVENT
If the following events occur for this camera, the main display (VGA or BNC) will switch to the video of this
cameraforaspeciedperiodoftime(dwell).Optionsare:Off, Motion, Alarm, Both(Motion&Alarm).
•DWELLTIME
Used in conjunction with Call By Event, Dwell Timespecieshowlongthemaindisplaywillshowthe
camera on the screen. The Dwell Time can be set from 3 to 60 seconds
•AUDIO
Select the corresponding AUDIO IN input for the camera. The audio for the selected AUDIO IN input will
be recorded along with the video for this camera. Selections include N/A or AUDIO Inputs 1 or 2. The
AUDIOINPUTScanonlybeassignedtoonecameraeach.Thedefaultsettingis“N/A”.
Note: The audio will only be heard when in full window view of the corresponding camera and the
Audio Out button is enabled.
•RECORDQUALITY
Select the Record Quality for each camera. Values range from 1-9, with 1 the lowest quality and 9 the
highest quality.