Manual

92
WPS-100-DVR-8CH Installation and Users Manual
9.3.7 VIDEO LOSS
Video Loss Setup allowstheadministratortodenehowthesystemrespondswhenvideosignalislost
for the camera.
Thefollowingisabriefdescriptionforeachiteminthismenuanditsspecicoperations:
 •CAMERA
  Selectthecameratodenevideolosstriggeredevents.
 •DURATION
Set the length of time the buzzer and the corresponding Alarm Out relay will remain triggered once
video loss is detected for this camera. The Buzzer and Alarm Out relay will reset immediately once
video signal is restored.
 •CAMERATOGO
  TheCameratoGosettingwillspecifywhichPTZcamerawillgotoapredenedpresetwhenvideolossis
detected for this camera. This feature is used in a system that includes PTZ cameras since the Camera
to Go must be a PTZ camera.
 •GOTOPRESET
  ThisfeatureworksinconjunctionwiththeCameratoGosettingaboveanddenesthepresetposition
  the“CameratoGo”PTZcamerawillgotowhenvideosignalislostforthiscamera.Formoredetails
about preset positions for PTZ cameras, refer to Section 7.
 •PRE-RECORD
  DenehowmuchtimetheDVRwillrecordbeforevideolossisdetected.ThePreRecordFPSsetin
Section 9.3.5 determines the frame rate of this recording.
Note: Actual pre-record time may be shorter than the value set if the total size of the pre-record video
exceeds the pre-record video buffer.
 •ALARMOUT
  DenewhichAlarmOutputwillbetriggeredwhenvideolossforthiscameraisdetected.SelectN/A
for none or either of the Alarm Outputs (1 for NC or 2 for NO).
 •BUZZER
By default, the internal buzzer is enabled to sound when video loss for the camera is detected.