Manual
99
WPS-100-DVR-8CH Installation and Users Manual
© 2012 Wirepath Surveillance
•MODEL
PTZ model (for PTZ and PTZ+Keyboard) refers to the type of the connected devices. The PTZ models
supported include Pelco D Protocol Dome, Samsung SCC-641P, Kalatel Cyber Dome, PIH-series, Dynacolor,
Bosch AutoDome, Video Trek, etc. The Keyboard models supported include Terminal (EX. VT-100)
and Control Protocol.
Note that if the PTZ+Keyboard is selected for Device Type, the Keyboard model is always Control
Protocol, and the other settings (Baud Rate, Data Bit, Stop Bit, and Parity) are the same as the PTZ Model
selected. In addition, be sure that the Keyboard Control Protocol and the PTZ Protocol won’t conict with
each other.
•BAUDRATE
Set the appropriate baud rate to match the devices. The baud rate must be the same for all devices on
the RS485 network.
•DATABIT
Set the appropriate Data Bit.
•STOPBIT
Set the appropriate Stop Bit.
•PARITY
Set the parity to Odd, Even, or None.
•DVR/CAMERAID
Set the PTZ IDfortheDVR.ItmustnotconictwithotherdevicesconnectedtotheRS485network.
9.3.13 FTP
FTP Setup allows the administrator to set FTP-related parameters. When an event occurs and FTP is enabled for
the action, the recorded video and audio for that event will be sent to the FTP server based on the parameters
set in this menu.