WPS-500-BUL-A-WH BULLET CAMERA INSTALLATION MANUAL Review manual thoroughly before installation. Retain for future reference.
WPS-500-BUL-A Installation Manual CONTENTS Safety Instructions............................................................................... 3 Features............................................................................................... 4 Package Contents............................................................................. 5 Installation Instructions....................................................................... 6 Set-Up............................................................
WPS-500-BUL-A Installation Manual SAFETY INSTRUCTIONS This information is provided to ensure your safety and to prevent physical or financial loss. Please read this document carefully before installing and operating the camera. 1. Handle with care. Use caution when handling to avoid damage to sensitive internal components. 2. Do not install camera under extreme temperatures. This camera only operates under temperature conditions between 14˚F ~ 140˚F. 3.
WPS-500-BUL-A Installation Manual FEATURES • 1/3” Sony Super-HAD II CCD The Sony Super HAD II CCD is ideal for low lux illumination, resulting in a clear and crisp image. • Varifocal Auto-Iris Lens This camera features a varifocal lens with a focal length of 3.7-12 mm. The auto-iris function intuitively manages the amount of light passing through the lens for consistent image brightness.
WPS-500-BUL-A Installation Manual PACKAGE CONTENTS (1) Camera (1) AC/DC Plug (1) OSD Joystick / BNC Test Adapter (3) Screws (3) Wall Fasteners (1) 2.5mm Allen key (1) Foam gasket (1) Installation Manual (1) Spare Silica Pack in Vacuum sealed bag NOTE: A POWER SUPPLY IS NOT INCLUDED WITH THIS CAMERA. The PS-12DC-1A or WPS-PS multiple output power supplies are recommended. NOTE: The spare Silica pack is in a vacuum sealed bag, DO NOT remove from this bag until it is needed for use.
WPS-500-BUL-A Installation Manual INSTALLATION INSTRUCTIONS 1. Recommended cabling includes solid copper RG59 or RG6 for video, 18AWG two-conductor for power, and a CAT5 for RS485 control of the OSD. 2. Prior to installation, it is recommended to pre-adjust the camera’s bracket angle so the lens points in the desired direction. It is also recommended to connect the camera to a display and preadjust the zoom and focus (see step 5).
WPS-500-BUL-A Installation Manual WARNING – DO NOT CONNECT POWER TO THE RS485 LEADS. 5. Once the camera is installed, check the viewing angle, zoom and focus settings. The camera is supplied with an OSD Joystick / BNC Test Adapter that allows for viewing the output of the camera on a monitor or the WPSCCTV-TESTER (not included). Use this connection to adjust the camera directly from the installed location.
WPS-500-BUL-A Installation Manual SET-UP Operating the OSD Menu • To view the OSD, the OSD Joystick / BNC Test Adapter must be connected to a display monitor or WPSCCTV-TESTER (not included). OSD Menu Button • The button found on the pigtail provides five separate actions: UP, DOWN, EXIT, ENTER and MENU. • Press the button to enter into the OSD MENU page. • Press UP, DOWN, EXIT (Left) or ENTER (Right) to select items on the menu and begin configuration.
WPS-500-BUL-A Installation Manual OSD Menu Structure cont.
WPS-500-BUL-A Installation Manual OSD Menu Structure cont. (bold indicates factory preset) SPECIAL CAM TITLE ON, OFF MOTION ON, OFF AREA SEL AREA 1, 2, 3, 4 AREA STATE ON, OFF HEIGHT 0-15 (4) WIDTH 0-15 (4) LEFT/RIGHT 0-15 (2) TOP/BOTTOM 0-15 (2) DEGREE 0-255 (38) VIEW ON, OFF RETURN PRIVACY ON, OFF AREA SEL AREA 1, 2, 3, 4, 5, 6, 7 , 8 AREA STATE ON, OFF HEIGHT 0-255 (32) WIDTH 0-255 (32) LEFT/RIGHT 0-255 (20) TOP/BOTTOM 0-255 (16) COLOR 0-15 (0) RETURN PARK.
WPS-500-BUL-A Installation Manual OSD Menu Structure cont. (bold indicates factory preset) SPECIAL IMAGE ADJ. DISPLAY CRT PED LEVEL 0~63 (4) COLOR GAIN 0~255 (112) RETURN LCD GAMMA 0.05~1 (0.45) PED LEVEL 0~63 (12) COLOR GAIN 0~255 (144) RETURN USER GAMMA 0.05~1 (0.45) PED LEVEL 0~63 (17) COLOR GAIN 0~255 (160) RETURN COMM ADJ.
WPS-500-BUL-A Installation Manual OSD MENU SETTINGS The camera menu allows for the adjustment of settings to obtain optimal image clarity and color realism. Note : If there is a “ ” symbol after the option, enter into the subdirectory to adjust more settings. SETUP LENS EXPOSURE WHITE BAL. BACKLIGHT DAY&NIGHT DPC SPECIAL RESET EXIT MANUAL ATW1 OFF AUTO LENS • Select DC (Auto-IRIS), or MANUAL mode.
WPS-500-BUL-A Installation Manual • FLK controls the flickering effect on the screen resulting from different video refresh rates, e.g. NTSC (50 Hz, 60 Hz). In such cases, set the shutter to FLK to accommodate the different refresh rates. BRIGHTNESS SETUP Adjust the image brightness by selecting a brightness level from 1 to 255. The higher the setting, the brighter the image. AGC (Auto Gain Control) Setup AGC mode automatically amplifies the video signal during low light conditions.
WPS-500-BUL-A Installation Manual AWCSET Setting This function is ideal for an environment with the predominance of a single color. For example, when used in a casino and the camera is pointed to a green table, the color would be inaccurate and the overall tone of the picture would be too red. This mode compensates the white balance and offers a more accurate color. SETUP LENS EXPOSURE WHITE BAL.
WPS-500-BUL-A Installation Manual HLC (High Light Compensation) Setting The HLC function is used to cut off exceptionally bright light, such as vehicle headlights. Sensitivity can be adjusted based on the scene. • LEVEL: Adjust the HLC LEVEL from 0 to 255. The larger the value, the more sensitive the camera will be to bright lights. • MODE: HLC can be set to operate ALL DAY or only when the camera is in Black and White (B/W) mode (NIGHT ONLY).
WPS-500-BUL-A Installation Manual • D N LEVEL: Set the level that the camera switches from color mode to B/W mode. The larger the value, the quicker the camera will switch to B/W mode. • D N DELAY: Set the delay time before the camera switches from color mode to B/W mode. The delay time can be set from 0 to 30 seconds. • N D LEVEL: Set the level that the camera switches from B/W mode to color mode.
WPS-500-BUL-A Installation Manual • To display the camera name on the screen, set the CAM TITLE to ON. • Select a camera name by selecting one letter/number at a time using the menu at the bottom of the screen. Consider assigning a Camera Name that highlights the location of the camera such as Lobby, Main Hall, Entrance 1, etc. CAM TITLE 0123456 789ABCDE FGHIJKLM NOPQRSTU RWXYZ→← ↑↓（）~_▉/=&’～ .
WPS-500-BUL-A Installation Manual PRIVACY Setting Privacy Mask configuration allows the masking of up to 8 “surveillance-free” zones of the picture. For example, this may be used for a camera that has a neighbor’s window in part of the scene. Set PRIVACY MASK to ON to enter into the subdirectory. PRIVACY AREA SEL.
WPS-500-BUL-A Installation Manual IMAGE ADJ. SETTING • LENS SHAD: This feature brightens the corners of the image when using a wide angle view. • 2DNR: Digital noise reduction produces clear images in low light conditions. Not only does it help to reduce image noise, but it also minimizes the object from becoming blurred when in motion. Select ON to activate the DNR function, OFF to deactivate the function.
WPS-500-BUL-A Installation Manual • NEG. IMAGE: The Negative Image View offers a wider dynamic range and preserves most detail as it displays data exactly as the CCD sees it. Select ON for the Negative Image View mode to reproduce images with the most light intensity and color information. COMM ADJ The communication adjustments can be used to remotely control the camera’s OSD (On Screen Display) from a PTZ controller or DVR through RS-485.
WPS-500-BUL-A Installation Manual ID POS Select the position for the CAMERA ID on the display screen by using the left and right arrows “”, “” to move the ID. LANGUAGE Setting There are 2 language options: English and Chinese. VERSION Displays the factory firmware version. RESET If adjustment to the camera’s settings results in poor picture quality, it is recommended to restore the camera to factory default settings.
WPS-500-BUL-A Installation Manual SYSTEM DIAGRAM RS485 Cable DVR ID 1 PTZ Controller 22 ID 2 ID 0 ID 3 ID 4 ID 255
WPS-500-BUL-A Installation Manual TROUBLESHOOTING If you have trouble operating the camera, first refer to the following guidelines. If the problem persists, contact Technical Support at 866.838.5052. Nothing appears on the display • Check if the power for camera and monitor is ON. • Check if the VIDEO cable is connected to the camera BNC video output jack. • Check if the VIDEO cable is connected to the monitor VIDEO input jack. Image appears dim on the display • Check the monitor contrast setting.
WPS-500-BUL-A Installation Manual The color of the picture is not correct • Check White Balance and Color (Red / Blue) settings. • Reset the camera to factory default settings Screen flickers continuously • Check the camera location to make sure it is not pointing directly towards the sun or bright light source • Check if the flickerless control is set correctly; proper settings should reflect required refresh rates.
WPS-500-BUL-A Installation Manual SPECIFICATIONS WPS-500-BUL-A-WH — True Day/Night Outdoor Varifocal Bullet Camera (600 TVL DWDR) Video Infrared LED Power Image Sensor 1/3” Sony Super-HAD II CCD Effective Number of Pixels NTSC: 768(H) * 494(V) Resolution Color: 600 TVL; B/W: 650 TVL Min. Illumination Color: 0.01 Lux (F1.2), 0.0001Lux Gamma 0.45 S/N Ratio 52dB (AGC Off) BNC Video Output 1.0 Vp-p, 75 ohm Sync Mode Internal sync Scanning System 2:1 Interlace Horizontal Sync.
WPS-500-BUL-A Installation Manual DIMENSIONS 2.86” 3.54” 8.85” 1.52” 4.43” 10.48” 3.07” 4.57" 2.68” 3.
WPS-500-BUL-A Installation Manual WARRANTY 5-Year Limited Warranty This camera has a 5-Year Limited Warranty. The warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified, disassembled or improperly installed.
120823-1336 © 2012 Wirepath Surveillance
