User manual Mini Hawk III Revolution

23
www.staufenbiel-shop.com
[e-mail]
[phone]
EN
COMPLETION
The model assembly is now complete and you can get started with the channel programming. Check the
running direction of servos one more time. Please make note of the rudder deections as well as the exact
center of gravity in the table. For landing, the aileron should lifted as a brake ap.
Now you can enjoy your rst ight with your new MINI HAWK III. With the information contained within
these instructions, this model holds no unpleasant surprises for you. At the same time, it is a good idea for
an experienced RC pilot to launch it for the rst time.
Now get ready for some amazing and dynamic ying sessions with your new MINI HAWK III.
Team Staufenbiel
Function Normal:
Ailerons:
▲ 10 mm / ▼ 7 mm / 35% Expo
Elevator:
▲ 3 mm / ▼ 3 mm
Spoilers:
▲ 13 mm, with Elevator ▼ 1 mm
C.G.: 47-52mm behind the leading edge, recommended 51mm
SETTINGS
CONTROL THROWS:
CENTER OF GRAVITY: