Use and Care Manual

29 / 44
www.stcny.com
8.1A
!
G03Z
G03Z
S22
G03E
G03E
S22
G03E
G03E
S22
8.1B
S22
S02
16
4
#S02
#S22
1
2
#G03J
#G03Z
4
1
#G03E
#G03Y
S22
G03J
G03Y
G03J
G03Y
P21
P21
G03H
G03G
1#S232#S02
1#G03G
#G03H
1
1
#P21
8.2B
8.2C
8.2A
S23
G03G
G03H
G03G
G03H
S02
S02
G03G
G03H
Connect Gables and Roof Vents
Place all the parts for the gables on a level surface.
Make sure the pieces are in the correct positions before assembling.
Please carefully follow the order of assembly to ensure an easy installation.
Wear proper safety gear including shoes, gloves and goggles.
Secure each set with
four S02 screws.
G03J and G03Y. Attach shorter side (26.5”) to connector S22.
QTY
QTY
Connector
QTY
IMPORTANT: u-shaped cutout is not at midpoint of proles G03G and G03H. Attach shorter side
(26.5”) to connector P21. Make sure connector P21 is positioned correctly before connecting.
NOTE: Stickers with arrows are NOT next to connector P21.
Connectors P21 CLICKS into place.
QTY
Brace
QTY
QTY
Connector Screw
QTY
Slide connector P21 into proles G03G and G03H until it clicks securely into place.
Line up holes on bracing
bar S23 with holes in
proles G03G and G03H.
two S02 screws.
Line up gable proles with four S22 connectors as shown. Slide S22
connectors into channels of two sets of proles G03E. Slide S22 connectors into
channels of proles G03Z. Slide S22 connector into channels of proles G03J and G03Y.