Use and Care Manual

Insert long side of cable connector S06 at an angle
UP. Slide connector to other side of
channel. Use hex key to securely
tighten and hold in place.
Attach one side of short cable S16 to hook on S06
second S06 cable connector and with hook facing center, insert into
square and cable is tight. Use hex key to securely tighten and hold in place.
Repeat step 1.13 inserting cable connectors S06
corners are square and cable is tight. Use
hex key to securely tighten second
connector and hold in place.
1.13A
1.13B
1.14
IMPORTANT: Make sure all corners
are squared at 90 degrees.
IMPORTANT: Make sure all corners
are squared at 90 degrees.
G01I
G03C
G01I
G01J
G01J
G03D
61S# 2#S06
QTY
QTY
4
Cable Connector Cable
QTY
1
Hex Key
14 of 56
www.stcny.com
NOTE: ALL VIEWS ARE FROM INSIDE.
G02B
G01J
G01I
G02A
G17C
G17D
G01I
G01J
G02B
G02A
G17C
G17D