Use and Care Manual

GY1
GY9
3.8A
23 of 56
www.stcny.com
3.7B
Loosen the four screws in connectors S17L and S17R enough to adjust door
with two S02 screws and tighten four screws
ALL VIEWS FROM INSIDE.
tightening connectors S17L and S17R with S02 screws.
and G03W, lining up all holes.
Screw S02 screws into top
two holes. Tighten all screws.
QTY
6
1
#S02
#S11
Connector
3.7C
3.7D
3.7E
Screw S02 screws partially into
bottom two holes. Do not tighten.
G02L
G02K
S17L
S17R
S11
G02L
G02K
G06K
G06A
G06J
S17L
S17R
G06K
G06A
G02A
G02B
S02
S02
G06K
S11
G03W
S02
S02
G17B
G17A
Slide GY1 and GY9 panels into V-channels
Remove protective plastic from both sides of panels
GY1 and GY9. The clear panels are designed
with window shapes that curve outward.
Place the outward curved side facing
Remove protective plastic from EACH side of clear
panels before installing. Dispose of plastic properly.
Install with outward curved side FACING DOWN.
QTY
QTY
Clear PanelClear Panel
1
#GY1
1
#GY9
!