Use and Care Manual

Install Circular Vent

Place all the parts for circular vent on a level surface.

Make sure the pieces are in the correct positions before assembling.

Carefully follow the order of assembly to ensure an easy installation.

Wear proper safety gear including work shoes, gloves and goggles.

11.1A

Open box containing the parts for

circular vent. From the outside

of the greenhouse, line up vent

frame pins with holes in panel

GY9, and slide into place. From

the inside of the greenhouse,

slide circular vent under the

cable. Line up pins in vent

frame with holes in circular

vent and slide into place.

IMPORTANT: Circular vent rests under the bracing cable. See

step 3.10 for detailed instructions on adjusting the cables.

48 of 56

www.stcny.com

11.1C

Double check that the corners are squared at 90

degrees and adjust if necessary. See step 3.10 for

detailed instructions.

IMPORTANT: Make sure all corners are squared at 90 degrees.

VIEW FROM INSIDE.

11.1B

From the inside, secure the

vent with four plastic nuts.

VIEW FROM INSIDE.

GY9

11.1D

From outside, screw four S43

screws into holes in vent frame.

VIEW FROM OUTSIDE.

#S43

QTY

Circular Vent

QTYQTY

Vent FrameScrew

QTY

Plastic Nuts