User Manual
Setting Up
Add your choice of monitor by lining up the
registration pins and attaching it to the
monitor mount via the captive ΒΌ-20 screw.
Slide Base together, connecting the Post to the
Cross Rod. The Base only slides in from the
battery side.
Tighten the Base Lock Knob securely.
Note: To disassemble the Sled later, loosen
the Base Lock Knob, then press the Base
Release Safety while sliding the two halves
apart.
The Steadicam AERO arrives disassembled in a compact kit with the optional accessories
you selected. The customizable nature means your rig might differ slightly from the units
pictured in this manual. However, all the major parts and adjustments are the same.
Build the AERO from scratch:
9