Instructions / Assembly

Page 14
SET DATE: This setting is used by the camera
to display the correct date on the Info Bar of the
image.
SET TIME: This setting is used by the camera
to display the correct time on the Info Bar of the
image.
Advanced Settings
CAMERA NAME: This setting will allow you to
customize the name of your camera.
TIME ZONE This setting allows you to set your
camera to di󰀨erent time zones.
OPTIONS: Eastern | Central | Mountain |
Pacic | Alaskan | Hawaiian
TEMPERATURE UNIT: This setting is used to
change temperature format on Info Bar.
OPTIONS: Farhenheit | Celsius
INFORMATION BAR: This setting is used to
tell the camera whether the Info Bar should be
displayed at the bottom of images or video.
OPTIONS: On | O󰀨
TIME FORMAT: This setting is used by the camera
to change the display format for the time in the Info
Bar of the image.
OPTIONS: 12 hr | 24 hr
NOTE: If 24 hour format is selected, previous
SETUP TIME will be adjusted and AM/PM will be
removed.
LATITUDE: This setting is used for the GEO--
-TAG of the camera. It will not be displayed on
the images directly, but rather on the background
image information. The coordinates can be
changed from 000.000000 - 179.999999 and either
N (North) or S (South).
DVR MODE: This setting allows you to
continuously record new images/videos. Turning
this setting ON will continuously delete oldest
recorded les to make space for new les. When
turned OFF, the camera will stop recording new
les when SD card reaches capacity.
OPTIONS: On | O󰀨
LONGITUDE: This setting is used for the GEO-
TAG of the camera. It will not be displayed on
the images directly, but rather on the background
imageinformation. The coordinates can be
changed from000.000000 - 179.999999 and either
E (East) or W(West).