User Manual

STC-I550
www.stealthcam.net Toll Free 877-269-8490
28
OUT jack on the camera. Insert the other end into the RCA video IN
jack on the TV. Make sure to switch to VIDEO IN mode on your
TV. (See your TV owner’s manual for directions)
Turn on both the camera and TV monitor.
• Your camera is preset to NTSC TV out system by default. If
the handheld TV screen does not flicker, then you do not need
to set your TV out system. If the handheld TV screen flicker,
then you will need to proceed to the next step to set up your TV
out to PAL system.
• Press the [MENU] button once. This will bring up the word
{dEL} on the camera’s internal LCD screen.
• When you see the word {dEL} blinking, press [UP] button to
enter TV out setting mode.
• The word {tu} will be blinking. Press [OK]. The
display {tu – n} will be blinking.
• Press [DN] button to select TV out in PAL System
(which is use in most European and Asian
countries). The word {tu – P} will be blinking.