STC-V650 User’s Manual Toll Free Customer Support 1-877-269-8490 www.stealthcam.net Version 1.
STC-V650 For Customer Service or Warranty Information Call Toll Free 877-269-8490 Stealth Cam, LLC P.O. Box 539504 Grand Prairie, TX 75053-9504 www.stealthcam.net Stealth Cam Limited Warranty Your Stealth Cam scouting camera is covered by a 90 days Limited Warranty on parts and labor from the date of original purchase, and purchases must be made through an authorized dealer. The warranty covers defects in workmanship and materials.
STC-V650 Manual Contents Camera overview Picture capacity chart Camera kit contents Battery and memory Installation Definition Set up and programming Using the camera Mounting the camera Viewing & Deleting images Using external solar power Memory compatibility chart Technical Specs General Information Moon Phase symbol chart www.stealthcam.
STC-V650 Camera overview Front housing image with major parts indication. www.stealthcam.
STC-V650 Open view image with major parts indication: www.stealthcam.
STC-V650 Side view with major parts indication: www.stealthcam.
STC-V650 Picture / Image Capacity SD card High Mid Low Base AVI 16MB 8 17 40 160 1 32MB 16 34 80 320 2 64MB 32 68 160 640 4 128MB 64 136 320 1280 8 256MB 128 272 640 2560 16 512MB 256 544 1280 512 32 1 GB 512 1088 2560 10240 64 2 GB 1024 2176 5120 20480 128 NOTE: Picture / Image Capacity Chart provides approximate number of images or AVI movies based on resolution setting and the size of memory card.
STC-V650 Camera kit contents • Model STC-V650 Sniper Digital Scouting Camera • User Manual • USB cable • Mounting Strap www.stealthcam.
STC-V650 Battery & memory installation Warning: Do not use a different Voltage lead acid battery other than the one specified in this section. Doing so will damage the camera and will void the warranty. The Stealth Cam STC-V650 Sniper Advanced Digital Scouting Camera is designed to operate using two different types of battery power options. NOTE: Always have camera in the OFF position when installing or removing batteries. Removing battery while the camera is in operation may damage the camera.
STC-V650 12V Lead Acid external battery The STC-V650 is equipped with an external power jack designed to accept a barrel plug cable to attach to a sealed lead acid battery. (sold separately). This will enhance the camera’s field life. Battery cable and complete 12V Lead Acid battery kits are available wherever Stealth Cam scouting cameras are sold or call toll free 877-269-8490. Only Stealth Cam external battery accessories are recommended.
STC-V650 Memory Options Your STC-V650 camera is equipped with 32MB built in flash memory. The camera is also equipped with an expandable media card slot capable of accepting up to 2GB SD card (sold separately). With no memory card inserted into the slot, the camera will use the built in 32MB memory. If an SD card is inserted into the slot then the camera will bypass the built in memory, and utilize the SD memory for image storage.
STC-V650 SD cards must be clean (no images from other sources). If you are using the SD card from other cameras, please make sure to format the SD card in your computer using FAT formatting, not FAT32, prior to use in the camera. New cards are good to use straight from the package. www.stealthcam.
STC-V650 Definitions • Time out: To set the amount of time in minutes the camera will sleep between PIR triggering. • Flash: • • o Auto – Flash on based on surrounding light conditions. o Off – Turn off the flash. Capture mode: o 1P ~ 9P: 1 to 9 burst mode image capturing per PIR triggering. o Video: 5 to 90 seconds adjustable video per PIR triggering. Resolution: o 6.0M: Select this option to capture a 6.0 mega pixels image. (High image quality) o 3.0M: Select this option to capture a 3.
STC-V650 (Low image quality) o 0.3M: Select this option to capture a 0.3 mega pixels image. (Base image quality) o Video resolution (320 x 240): This is the resolution during video capturing. • Batteries Status: It shows the battery status. o Full: It shows the battery is full. o Low: It shows the battery is low and front Low Battery indicator will also blink. When the camera has detected low batteries, (Batteries are lower then 5.8 +/-0.
STC-V650 • Moon phase and Temperature: Displays the moon phase and temperature. • PIR Far/Near dial: Adjusts the PIR detection sensitivity. o Near is 19 feet o Far is 30 feet www.stealthcam.
STC-V650 Set up and Programming When the camera is first turned on, the internal LCD screen displays the camera status. The following information is displayed on this screen. Flash Mode Control: The camera is pre-programmed with Auto Flash setting. • Switch the camera to ON position. • To turn off the flash mode, press the [UP] button once within 30 seconds. screen.
STC-V650 If no buttons are pressed after 30 seconds, the LCD screen will power down to conserve battery life and enter 1 minute count down to enter PIR detection mode. To re-power the display screen, press and hold the UP or DOWN button until the status screen appears. Programming the Stealth Cam STC-V650 Switch the camera to the ON position. Once the Camera status screen is visible, press the MENU button. This will bring up the SETTING screen.
STC-V650 Set the Capturing sequence. The Stealth Cam STC-V650 can be programmed to shoot 1-9 pictures per triggering or 5~90 seconds of video. • Power on the unit, press the [MENU] button to bring up the menu on the LCD screen. • Press [UP] or [DN] to highlight CAPTURE mode. • Then press the [OK] button to enter capture setting. • Press the [UP] or [DN] button to select the desired capture setting (number of pictures per triggering) and press the [OK] button to save.
STC-V650 • Use the UP and DOWN buttons to select additional program settings, or press [MENU] again to exit the SETTING SCREEN. Set the Time out: • Press the [UP] or [DN] button to highlight TIME OUT. • Press [OK] to enter the setting. • Press [UP] or [DN] button to set the desired time out in minutes (one minute increment from 1-10 and five minute increments from 10 to 59 minutes). • Press [OK] again to save the setting. You will be returned to the SETTING SCREEN menu.
STC-V650 • Press [OK] to enter the setting. • Press the [UP] or [DN] to set the TV output in NTSC or PAL system. • Press [OK] again to save the setting. You will be returned to the camera’s status screen. Set Date and Time: This camera uses the 24hr military time format. • Press the [MENU] button to bring up the menu on the LCD screen. • Press the [UP] or [DN] button to highlight DATE AND TIME. • Press [OK] to enter the TIME & DATE setting menu. • Press [UP] or [DN] to select the TIME.
STC-V650 • Using the UP or DN buttons, select the appropriate month then press OK. This will bring you to the day setting. Using the [UP] or [DN] buttons, select the appropriate date, then press OK. This will bring you to the year setting. Using the [UP] or [DN] buttons to select the appropriate year, then press OK. This will return you to the DATE & TIME setting menu. • Press the [MENU] to return to the main setting menu.
STC-V650 Using the camera Once all program settings have been completed, your Stealth Cam is ready for field use. Getting started: It is recommended that you mount the camera 4-5 ft off the ground with the camera pointed at a slight downward angle. Be sure to avoid mounting the camera facing east or west, as the rising and setting of the sun could produce false triggers and overexposed images.
STC-V650 Mounting the camera Mounting the camera with the Tree Screw (Optional Accessory sold separately) • Hand twist the screw into the tree or post at the desired position. • Attach the camera to the screw by turning the camera onto the mounting screw to the desired position. • Tighten the stabilizer nut. www.stealthcam.
STC-V650 Do not over tighten, as this may cause damage to the camera housing. Use the nut and washer to tighten the bottom of camera for greater stability. Mounting the camera with the supplied strap: • Insert the strap through the strap slots on the rear housing. • Wrap the strap around the mounting surface. Secure the strap and tighten the buckle in order to secure the camera. www.stealthcam.
STC-V650 Stealth Cam offers a Security Lock Bracket for uses exclusively with this camera. For the latest Stealthcam accessories go to: www.stealthcam.net or call toll free 877-269-8490 In order to obtain proper weather resistance, please make sure that both door latches are securely locked in place. Testing the camera coverage area One of Stealth Cam’s many features, is the ability to test the coverage area. • After mounting the camera, open front housing and slide the power to ON.
STC-V650 coverage area. • Adjust the camera position as needed, and repeat testing until the desired coverage area is achieved. • When you have completed testing the coverage area, there are 2 methods to exit the test mode: a. Open the front housing and press the [TEST] button to exit test mode. The camera will then enter count down mode for 1 minute, and the front green indicator will start blinking, giving you 1 minute to leave the coverage area. The camera will then enter PIR detection mode. b.
STC-V650 • Open the front housing and move the switch to the ON position. At this point, you have 30 seconds to make any program adjustments. • After 30 seconds the camera’s green LED light will begin blinking and enter count down mode. This is your indication to leave the coverage area within one minute. • After one minute, the camera will enter either image burst mode or adjustable video mode based on your program setting.
STC-V650 Viewing and deleting the images The STC-V650 cam offers the user different options for viewing the images. The external LCD display on the front of the housing will show the number of images in memory. To wake the camera from PIR detection mode, press and hold either the [UP] or [DN] button for approximately 5 seconds. Camera status screen will appear. Press [OK] button once, the color screen will display the last image captured. Press [OK] button once more to bring up the thumbnail screen.
STC-V650 • Using the [UP] and [DN] button, you may navigate and select the image you wish to view. Press [OK] to either display the whole image on the screen or to play the video, if it is a video clip. • To return to the thumbnail view from the full size image or at the end of a video clip, press the [OK] button. Viewing images by computer download: The Stealth Cam STC-V650 Digital Scouting Camera is a plug and play USB storage device.
STC-V650 Viewing the image on a handheld LCD TV video monitor, or your home TV equipped with an RCA input jack (cables sold separately) For viewing on handheld LCD TV, attach the appropriate cable to the video OUT jack on the camera. Insert the other end into the video IN jack on handheld LCD TV monitor. For viewing on home TV, attach the appropriate cable to the video OUT jack on the camera. Insert the other end into the RCA video IN jack on the TV. Make sure to switch to VIDEO IN mode on your TV.
STC-V650 image is still image or video clip. • Using the [UP] and [DN] button, you may navigate and select the image you wish to view. Press [OK] to either display the whole image on the screen or to play the video, if it is a video clip. • To return to the thumbnail view from the full size image or at the end of a video clip, press the [OK] button. Deleting images At any time while viewing images on the built in LCD, Handheld TV or Home TV you may delete images one at a time or all at once.
STC-V650 Using external solar power: This Stealth Cam is designed to be used with an optional Stealth Cam solar panel accessory kit. (Sold separately) • Make sure the camera is turned to OFF. • Open the battery cover. • Insert 6 C size rechargeable batteries into battery compartment and close the battery door. • Adjust the solar panel’s receiving side toward the sufficient sun light direction. • Insert the solar panel’s plug into the solar jack of the bottom of camera housing.
STC-V650 correct polarity (+/-). Incorrect voltage or polarity (+/-) will damage the camera. • For first time use, please leave the solar panel with camera power switch turned in OFF position for full daylight charging for at least 20 hours. www.stealthcam.
STC-V650 SD Memory Card Compatibility Chart The following cards have been tested and approved for use in the STC-V650 model.
STC-V650 Technical Specifications System Requirements and Compatibility: • Windows 98/98se/2000/Me/XP/Vista • P 450MHz or equivalent processor. • 128MB SDRAM or above. • VGA Video Card with 32MB RAM for minimum, Color 16 bit or higher. • An available USB Port. • 600 MB free hard disc space. If you have any questions regarding your PC specifications, please call your PC manufacturer. www.stealthcam.
STC-V650 Camera Features and Specification. • Image sensor: 2.0M CMOS Color sensor pixels. • Built in 2.0” color display. • Built in 32M flash memories for image storage. • External memory support: SD memory card up to 2.0 GB. • Resolution Options: 6.0M, 3.0M, 1.3M, 0.3M. • 2 Capturing Options: Continuous burst mode or AVI clip. • Image performance for video stream: 10fps in 320 x 240 pixels. • Auto white balance and auto expose. • Flash light strobe Auto & Off control.
STC-V650 • High precision 5P glass lens with IR coating. • Effective viewing Angle: 52 degrees. • PIR detection angle 48 degrees. • Low power consumption: Standby current: < 1mA. Capture current <150mA • Interface type: USB 1.1. • Power: C size alkaline batteries x 6. • External power: Solar or 12 volt battery pack. • Image format: Standard JPEG or Motion JPEG. (AVI) www.stealthcam.
STC-V650 General Information Storing conditions: • Operating Environment: 14 to 104 deg. F (-10 to 40 deg C). 2085% relative humidity, non-condensing. Special care instructions!! • This camera is designed to be weather resistant. Never attempt to immerse the unit in water or any other liquid. This will damage the unit and void the warranty. • Use a soft lens cloth for cleaning the lens. Avoid touching lens with fingers.
STC-V650 • Do not mix new and old batteries. • Do not open the camera for unauthorized service. This could cause serious damage to the unit, and will void the warranty. This camera is a precision electronic device. Do not attempt to service this camera yourself, as opening or removing covers, may expose you to dangerous voltage points or other risks. May be protected by one or more U.S. Patent numbers: 6,735,387 6,768,868 6,834,162 7,149,422 7,308,196 www.stealthcam.
STC-V650 Moon Phase Symbol Chart Product specifications are subject to change. Stealthcam is not responsible for any photographic or typographical errors. www.stealthcam.
