Instructions / Assembly

- 16 -
Choose your type of machine
Measure the length, width and height (foot) of the current steam shower or bathtub room.
Example;
L:7 x W:5 x H:8 = 280 Cubic Feet x 2 to get complete cubic measurement.
Important: The calculation formula for selecting the type of steam engine is for reference only. Due to the variability of the building, the
specifications and size illustration are used as guidelines only. If you have complete information, including actual blueprint, project instruction
and building details, you can select the type of steam unit required. Otherwise, the manufacturer will not be responsible for the selection of
the type of steam unit.
Maintenance of the steam engine
Important: Perform water discharge operation after each use.
1. Wait for the completion of automatic water discharge after each time of using the steam engine to make sure the water in the tank
is discharged completely before cutting off power supply.
2. There should not be any leakage or damage among the steam engine, steam nozzle, components and pipes. They should be
checked monthly.
3. Clean the water supply pipes of the steam engine once a year.
4. Check all the connections, faucets and connection terminal to see whether they become loose or are damaged due to overheating.
5. Check the furring/scaling accumulated in the water tank and electric heating tube. If the furring is thick, clean it (use diluted lemon
acid to soak for 15-30 minutes).
6. Remove the water level sensory needle four times per year to clean the furring/scaling in the needle.