Instructions / Assembly

- 23 -
Operation Instruction:
1. When power supply is applied to the steam box system the RED stand-by light will be illuminated. (see Illustration of the controller
panel for location)
2. Pressing the ON/OFF button will start the system. The steam box will fill with water. This will take a few minutes; the water may cycle
on and off a few times as the water tank fills. This is normal operation. The display will show ambient Temperature and Running time – 8hrs.
3. When the red light next to the ON/OFF button becomes illuminated the system is operating and will start generating steam for 5 – 8
minutes.
4. Pressing the UP and Down arrows under the temperature display will adjust the temperature accordingly. The temperature can be
changed from Celsius to Fahrenheit . The temperature range is 25ºC to 68ºC or 78ºF to 150ºF. The unit will cycle on and off to maintain the
set temperature.
Once the user has adjusted the temperature to their preferred temperature, the temperature lights will blink several times and time will be the
active temperature.
5. When system is on, press UP or DOWN triangle keys on control panel to adjust running time, meanwhile, time display window shows
the time you desire. The steam time range is 1minute to 8hours. When setting time to less than 1hour, the time unit is by the minute; when
more than 1hour, the unit is hour and time display window will indicate h.
6. When system is on, press the LIGHT key to turn on light; press again to turn off.
7. When system is in waiting state, press keys DOWN temperature key and UP triangle at the same time will switch Fahrenheit and
centigrade and temp display window display/ F means Fahrenheit; display C means centigrade. System will save it for next usage.
Attention:
1. Use soft cloth with soap and water to clean the controller.
2. Do not use abrasive cleaning tools.