Installation Guide

13 pg
2. Connect the steam generator according to the drawing.
a. Water inlet: 1/2in thread connector.
b. Drain: 1/2in thread connector. Must be copper for at least first 3ft from the generator.
c. Steam outlet: 3/4in thread connector
d. Steam line: Must use copper. Insulate the line with high temp 212 plus temp rating insulation.
e. Install a brass union on the steam line for easy disassembly.
f. Install a brass union on water inlet for easy disassembly.
g. Install a brass union on drain valve for easy disassembly.