Installation Guide

KEYPAD OPERATIONS INSTRUCTIONS

Press on button – Keypad will light up

NOTE: When keypad has not been used for 30 seconds the locked symbol on the

right side of the keypad will light up. To get out of locked mode press the Shuttle

Knob

If you rotate the Shuttle Knob and it doesn’t move, make sure it is not in the locked

mode. Rotate the Shuttle Knob and the Various options will become highlighted on

the Crystal Display (keypad). When you get the option you want Press the Shuttle

Knob to select a particular mode

For example: To start up the Steam Generator

To start the steam generator, turn the Shuttle Knob to steam, press the Shuttle

Knob and the Steam on the Crystal Display will light up and the steam room

temperature will be displayed. A default Time and Temperature will be displayed

near the bottom of the Crystal Display. In order to change the time and/or

Temperature the Steam Generator must be on. To change the temperature for the

steam room, Press the Shuttle Knob, then rotate the Shuttle Knob to highlight the

Temp

Press the Shuttle Knob to engage the temp control and rotate the Shuttle Knob to

the desired room temperature, press the Shuttle Knob to set the temperature. To

change the time (duration of the steam setting), Rotate the Shuttle Knob until the

Timing on the Crystal Display is highlighted, press the Shuttle Knob to engage the

timer and rotate it to the desired time. Press the Shuttle Knob to set the time.

The Steam Generator has an automatic draining system that will engage

automatically about 6 minutes after the power is off

To operate the various other options on the Crystal Display, see below.

Spray: Not applicable

The Light: will come on when the off/on button is pressed. If you wish to turn on or turn off the light, rotate the Shuttle Knob until the

Light is highlighted on the Crystal display and press the Shuttle Knob to turn the light on or off.

The Fan: can be accessed the same way as the lights, (it does not come on automatically). The fan is NOT an exhaust fan but a

recirculating fan. Steam rises so the fan should be on to force the steam to the lower area of the steam room.

Sterilizer: Not Applicable

Radio Function:

Rotate the Shuttle Knob until the Radio is highlighted, press the Shuttle Knob and the radio will come on. Next rotate the Shuttle Knob

until the Tune is highlighted Press the_______ to find radio stations at higher frequencies and press ________ to lower the radio

frequencies. Once you have located your desired station, press the Shuttle Knob to lock it in. The Mhz will be displayed. To Manually

find a station Make sure the Mhz is flashing by making sure the tune is highlighted and pressing Shuttle Knob. The Mhz will start to

flash then you can then rotate the Shuttle Knob to the particular station. Once you have found your particular station press the Shuttle

Knob to set it.

I Music

To access the Bluetooth features of the unit you need to connect to the Device SANJUN_BT.

Rotate the Shuttle Knob until the i Music is highlighted press the Shuttle Knob to engage the Blue Tooth.

You will see ON at the top of the crystal display when connected (if not press the Shuttle switch)

You can play and control music from your Smart Phone.