Installation Guide
Table Of Contents
- READ ME FIRST
- COMMON INSTALLATION PROBLEMS:
- WARNINGS:
- MANDATORY READING
- PART 1: STEAM GENERATOR
- USER INSTRUCTIONS
- CHOOSE YOUR TYPE OF MACHINE
- MAINTENANCE
- STEAM GENERATOR CLEANING
- SENSOR PROBE REMOVAL FOR DIRECT CLEANING
- CHOOSING PROPER LOCATION
- INSTALLATION DRAWING OF THE STEAM GENERATOR
- INSTALLATION OF STEAM LINE
- BLUEPRINT FOR THE STEAM ENGINE
- ELECTRICAL REQUIREMENTS:
- AMPERE METER
- ASSEMBLY GRAPH FOR POWER WIRE
- Wiring Diagram 220-240V (1PH/2PH)
- INSTALLATION OF THE TOP LIGHT
- STEAM GENERATOR CONFIGURATION
- TROUBLE SHOOTING:
- DELUXE KEYPAD ERROR CODES
- INSTRUCTIONS FOR RESETTING THE MANUAL HI-LIMIT SWITCHES
- SPECIFICATIONS
- PART 2: STANDARD CONTROL PANEL
- PART 3: DELUXE CONTROL PANEL
- PART 4: ADDITIONAL INFORMATION
2 | Page
READ ME FIRST
1. Verify the parts checklist to ensure that all necessary parts have been received.
2. DO NOT TWIST THE PLUGS together when connecting the keypad and/or the keypad extension wire to the steam generator
cable. Twisting will damage the pins and it is not covered under the warranty.
3. Keypad box contains:
a. Keypad
b. Steam head
c. Escutcheon (temperature detector foundation)
4. Light kits are available for the GS08 Steam Generators. White lights and chromotherapy lights are available. Contact your
place of purchase.
COMMON INSTALLATION PROBLEMS:
99% of the issues with these units upon the first power up can be traced to one of two items:
1. Is the unit connected to 220v? The unit has no neutral wire just L1, L2 and Ground. To properly test for the 220v you must test
the L1 and L2 wires together and you should get 220v. If you test individually the L1 and L2 that can give you a false reading.
2. Is the wiring that connects the keypad to the steam generator damaged? Pull apart the connections (there are two, one near
the keypad and one near the steam engine) and make sure none of the pins are bent or missing. If any are bent or missing
replace the appropriate cable. Make sure when reconnecting the cables, they are tight.
ATTENTION: MANDATORY READING
INSTALLATION UPDATES – PAGE 4
WARNING: Damaged and missing pins are not covered by the warranty.
They are inspected before shipping.