Use and Care Manual

Page5
USER MANUAL OF GS08T CONTROL PANEL
USER PREFER MODEL SETTING
In user model interface as picture 6, Click the icon to pop up the dialog window as shown in picture 8:
select" Yes "to set parameters with this user, and select" No "to exit setting interface. The user prefer mode
setting will be valid when the steam is on. If steam off, user can’t set user prefer mode.
User parameter modification
On user prefer mode setting interface, touch the area on the right of corresponding user information
and the dialog box pops up as shown in picture 7. By sliding the parameters up and down in the temperature
area or time area, adjust the parameters to the middle position of the window and touch the "Set" key to save
the user information. Touch “Exit” to give up the setting.
1
PRESET OPEN TIME
Touch the icon to enter the setting interface, and touch the icon on the right of" Working
Mode "to enter the appointment setting interface as shown in picture 12.
A. Setting of startup Time: Touch the startup time area to pop up the sliding window and select the
time to boot.
B. Select the mode of appointment: Select the required mode of appointment by touching the
corresponding Settings . After completing the following actions and touching the "Set"
key, the parameters of appointment can be valid. Give up this operation by touching "Exit". Touch the two
buttons above mentioned to go back to the main setting interface.
C. When the appointment open time is reached, the system will start up automatically and steam will be
turned on. Steam temperature and working time using the parameters of User 1.
D. You can modify the default steam temperature and working time on the APP.
10:30
DAY
OFF
REP
ONE
SUN MON
TUE
WED
THU
FRI SAT
REAL TIME CLOCK SETTING
Under the setting interface, touch the button on the right of to enter the clock setting
interface as shown in Figure 13.
Time calibration: touch the parameters to be adjusted, such as: year, month, day, hour, minute; The
corresponding scroll setting bar will pop up, and the corresponding parameters will be found and clicked.
Time calibration can be completed by setting the above parameters and touching the Set key. The time can
be synchronized through the APP on mobile.
Clock display: Touch the display area to choose whether to display the clock function after
shutdown. When the option is checked, the system shutdown displays the clock and the panel backlight is
correspondingly lowered when the clock is displayed
Real-time clock
Show real time
TEMPERATURE UNIT SWITCH
On Settings interface, you can switch temperature units by touching or . Default steam
temperature is 45 or 113℃ ℉.
℃ ℉