Manualshelf

Use and Care Manual

ManualsBrandsSteam Planet ManualsBathSuperior SMART 9kW Self-Draining Steam Bath Generator Kit, Wi-Fi Keypad in Black, Chrome Steam Outlet and 2 Speakers
12345678910
Page6
USER MANUAL OF GS08T CONTROL PANEL
SAFETY LOCK
Touching Safety lock on setting interface, pop-up dialog box shown in figure 14, we can type four
number password and touch “OK” to save password, if user forget the password, user can type the password
2580 to enter into the system.
After we set password, when we touch power on/off button to start system, password dialog window will
Pop-up as picture 2. After entering the correct password, you can enter the control interface. Power on by
appointment open time and APP are not controlled by the safety lock. System can enter into main setting
interface directly. We can close safety lock function on setting interface by touching icon .
COMMERCIAL MODE AND RESIDENTIAL MODE
in commercial mode, steam working time is 8 hours and the steam temperature is 45 or 113℃ ℉.
in residential mode: default steam working time and steam temperature are same as last time setting. if this
time user changed steam temperature and working time, data will be saved for next time using.
When the on the right of memory mode is on, system is in residential mode, when it shows , system
is in commercial mode.
ECONOMY MODE
We can switch on/off economy mode on setting interface. When economy mode works, maximum steam
temperature is 50 or 122 , at the same time, we can see icon shows on display window.℃ ℉
WIFI MATCHING
On setting interface, touching on the right side of " WIFI Match " item to pop up the dialog box, after
selected " Yes ", WIFI box will enter the pairing state, the phone needs to operate according to the APP usage
requirements. LED on WIFI box flashing when it is in paring state. If paring is unsuccessful in 2minutes,
system will quit the paring state automatically. Select "No" to give up the pairing operation.
RESTORE FACTORY MODE
On setting interface, touching the icon on the right of Factory Setting to pop up the dialog box, select
" Yes "to restore the user data from Factory setting. Select "No" to give up the operation.
Trouble shooting
When system failure, we can see the icon is shown on the upper left corner of the main setting interface,
touch this icon will pop up the dialog to show you problem and solution. pressing "Ok" to see the error code.
pressing "Exit" to Exit the prompt window. The probl em and solution message will be shown as followings: