Installation Guide

Rev1/2015
12 | P a g e
CONTROL PANEL FOR STEAM SHOWER:
CONTROL PROCEDURES
Power on/off
Push any button to light the display, and press the power on/off switch to start the system. Push the power on/off switch again to turn
off the system and display.
Steam Temperature Setting
Touch the Steam Temperature Setting button and the display will appear on the screen. The temperature ranges from 20°C to 59°C
circularly. Let go of the button when the desired temperature has been reached, and the figure is set as a steam setting. The steam
generator stops working when the temperature inside is 4°C higher than setting temperature. The steam generator has 4°C variance
between accrual set temperature and real temperature. The default steam setting is 45°C if the user does not choose any setting.
Steam Time Setting
Touch the Steam Time Setting button and the display. The range is 20-59 minutes. Let go of the button when the figure reaches the
desired time and is set as the working time for the system. The system is automatically shuts off when the set time expires or 45
minutes is up (default system time).