RESIDENTIAL STEAM GENERATORS INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Steam Ranger® Installation, Operation & Maintenance Manual Steam Sauna Inc manufactures steam generators for any steam bath need. They are the result of many years of continued research. From the smallest residential unit to the largest commercial unit, our products are manufactured to the same rigid quality standard. We also custom build for those specialized applications e.g.
Steam Ranger® Installation, Operation & Maintenance Manual SPECIFICATION SHEET KW MAX Volts/ Phase/ Amps Wire Gauge CU FT RANGE MAX DIM LxWxH (w/drain) NET WEIGHT RV9 8.5 240/1/38 8 50-375 15”x5”x12” 24 lbs RV13 13 240/1/55 6 50-600 15”x8”x12” 30 lbs RV15 15 240/1/63 4 50-700 15”x8”x12” 30 lbs RV18 18 240/1/75 3 50-800 15”x8”x12” 30 lbs RS50 3.0 240/1/13 12 50-90 23”x7”x10” 25 lbs RS100 4.5 240/1/19 12 90-150 23”x7”x10” 25 lbs RS150 6.
Steam Ranger® Installation, Operation & Maintenance Manual INSTALLATION GUIDE Wiring Diagram for Upgrading Computer Board Jumpers: JP1 Open: Close: JP2 Open: Close: timer. JP3: Open: Close: 90-min. safety feature active. Safety feature off. External timer with or without button. Only E-Touch button with 30-min. built-in Digital Timer. Mechanical Timer. Not Used: (Only with special instructions from the manufacturer). Connectors: CN1: 240V AC Input Power. CN2: Output Connector.
Steam Ranger® Installation, Operation & Maintenance Manual GENERAL INSTALLATION INSTRUCTIONS Steam Room Locate the legged surface under the unit, if you are using an existing completely tiled shower or bathtub enclosure, make sure that it is enclosed to the ceiling. Locating the Unit Plan the location of your steam unit carefully. Place it for convenient installation and easy access. A good location, when possible, is in a furnace room or storage room.
Steam Ranger® Installation, Operation & Maintenance Manual may cause burns. Step 4. Electrical Connection Have a qualified electrician connect the unit. The power cable size and breaker size is to be determined by an electrician. Use the specification sheet inside this manual to find the voltage and wattage rating of your unit. All applicable electrical codes must be strictly adhered to. Check your supply voltage to ensure it is compatible with the voltage listed on your unit’s label.
Steam Ranger® Installation, Operation & Maintenance Manual 9. Never use a steam bath after consuming alcohol or mind altering drugs. 10. Do not allow children to use a steam bath without adult supervision. 11. This unit is designed for steam baths only. If you wish to use it for other purposes, contact the manufacturer to find out if it is suited for your application.
Steam Ranger® Installation, Operation & Maintenance Manual BASIC TROUBLE SHOOTING GUIDE Symptoms New unit does not produce steam after it is connected Possible cause - Water is shut off - Electrical Power is off - Timer is not set - Thermostat not set - Unit not installed correctly - Not connected properly - Ground terminal connected with neutral - Thermostat sensor loose Connection - Temperature setting lower than room temp.
Steam Ranger® Installation, Operation & Maintenance Manual BLUE DESIGN CONTROLLER - Ver. 2011 A. Installation Install the controller outside/inside the steam room, and, preferably, beside the door, where you can have easy access. Run the sensor wire to the steam room. The best location for the sensor is 5” above the door; and the sensor tip should be exposed 1.5” into the room. Plug in the connector cable. The arrow on the male and female plugs should face each other. B.
Steam Ranger® Installation, Operation & Maintenance Manual 1. Lock function (a) (b) Press and hold the time up ▲ button for 8 seconds, LED displays LOC, which means that all the settings are locked and cannot be changed. To unlock, press and hold the time up ▲ button for 8 seconds, LED displays ON, which means that the settings are unlocked and can be changed now. 2.
Steam Ranger® Installation, Operation & Maintenance Manual LCD Display Entertainment Package with Universal Remote Control OK button - to activate and confirm the selected function. To unlock the control, press any button except on/off and set the button for 5 sec. UP/DOWN buttons – to select the devices. SET button - to select the functions of temperature, time, C/F conversion, radio channel, and CD player. Left/Right buttons - to change the set points of temperature, time, radio volume, and channel.
Steam Ranger® Installation, Operation & Maintenance Manual BREGUETI Touch Control A. Installation Install the controller inside/outside the steam room, and, preferably, beside the door, where you can have easy access. Run the sensor wire in the wall, and then protrude the probe head into the room. The best location for sensor is 5” above the door level and the sensor tip should be exposed 1.5” into the room, also further away from steam head.
Steam Ranger® Installation, Operation & Maintenance Manual RVRV BREGUETI Plus Control - RV Glass Touch A. Installation This controller is installed inside the steam room only, and it comes with a built-in temperature sensor. The best location for the control is close to your bench for easy access, also further away from steam head. It is recommended to install the control pad from 36" up to the maximum 48" height. Note: The controller is provided with a 25 ft standard-length connector cable.
Steam Ranger® Installation, Operation & Maintenance Manual LED STONE TOUCH BUTTON Touch to turn on and shut off steam with blue LED indicator light. LED PUSH BUTTON Touch to turn on and shut off steam with blue LED indicator light.
Steam Ranger® Installation, Operation & Maintenance Manual LCD FILTRATION Filter System Calcium and other mineral deposits are your steam generator’s worst enemy. The factory installed a sediment filter on the incoming water supply line is imperative. However, a secondary filtration system to reduce or remove these components from the water prior to its entering the unit will not only extend time between service calls, it will extend the life of your unit.
Steam Ranger® Installation, Operation & Maintenance Manual WARRANTY The manufacturer warrants each part to be free from defects in material and workmanship, in the course of normal use and agrees to repair or exchange any part thereof in which such defects appear, to the satisfaction of the manufacturer. This warranty is applied within the boundaries of the United States or Canada.
Steam Ranger® Installation, Operation & Maintenance Manual STEAM SAUNA INC. U.S. 210 South 8th Street Lewiston, NY 14092 1-800-354-8462 www.steam-sauna.com Canada 153 Bridgeland Ave., Unit 13 North York, ON M6A 2Y6 1-800-387-0309 sales@steam-sauna.