Use and Care Manual

ENGLISH
|
5
•
The Steam Nozzle (1) emits the ow of hot, penetrating steam produced by the Boiler. The
Fabric Brush connects to the Steam Nozzle.
•
The Pole Top (2) connects to the top section of the Telescopic Pole. The Pole Top is
comprised of the Steam Nozzle Cradle and Clothes Hanger Hooks, and includes the Hanger
Anchor Holes.
•
The Hanger Anchor Holes (2
a) serve as the connection point for attaching the included
Hanger.
•
The Clothes Hanger Hooks (2b) are included as an alternative to the included Hanger. The
Clothes Hanger Hooks can support garments hung from any clean rust-free hanger.
•
The Steam Nozzle Cradle (2c) provides a safe and convenient place to hang the Steam
Nozzle when not in use.
•
The Handle (3) is engineered to stay cool while providing maximum grip and comfort.
•
The Hose (4) directs steam ow from the main unit to the Steam Nozzle.
•
The Hose Base (4a) is the threaded receptacle onto which the Hose is screwed and secured
to the front of the main unit.
•
The Telescopic Pole (5) connects to the main unit at the Pole Base. The Telescopic Pole is
divided into four sections, three of which can be extended and lowered to a variety of heights
for optimal user comfort and convenient storage.
•
The Pole Base (5a) is the receptacle into which the Telescopic Pole is inserted and secured to
the top of the main unit.
•
The Water Tank (6) is the container that holds water to be transferred into the Water Reservoir.
The Water Tank is removable for convenient lling, up to a maximum capacity of 70 oz (2,070 ml).
•
The Valve Cap (6a) regulates the ow of water between the Water Tank and the Water
Reservoir, and must be removed in order to ll the Water Tank with water.
•
The Water Reservoir (7) holds water before it is transferred to the Boiler and converted into
steam.
•
The Lighted On/Off Switch (8) powers the unit on and off. When set to the “I” (on) position, it
illuminates to provide a clear visual indication that the unit is receiving power.
•
The Boiler (9) is the internal heater where water transferred from the Water Reservoir is
converted into steam.
•
The Cord Wrap (10) is designed to hold the power cord when not in use.
•
The Drain Plug (11) is opened to easily empty the Water Reservoir of any remaining water.
•
The Fabric Brush (12) connects to the Steam Nozzle and is designed to brush away particles
such as lint, hairs and loose threads.
•
The Hanger (13) connects to the Pole Top via the Hanger Anchor Holes. The Hanger is
designed to support garments for easy, accessible steaming, and quickly collapses for
convenient storage.