Use And Care Manual

ENGLISH
|
9
PROBLEM POSSIBLE CAUSE SOLUTION
Unit fails to heat up and steam.
Power Indicator Light does
not illuminate.
Unit is not plugged in. Plug into electrical outlet.
Household Circuit Breaker/
Ground Fault Interrupter has
tripped or blown a fuse.
Reset Circuit Breaker/Ground
Fault Interrupter, or replace fuse.
If you need assistance, contact a
licensed electrician.
Unit fails to heat up and
steam. Power Indicator Light
does illuminate.
Auto Shut-Off has engaged. Refer to Auto Shut-Off section on
page 8 of this manual for proper
procedure.
Water Reservoir is empty. Refill Water Reservoir using
procedures on page 6 of this manual.
Unit is damaged or
malfunctioning.
Immediately cease usage and contact
our Customer Support Department.
Steam Burst output is weak
or intermittent.
Pressing Plate needs to be
cleaned.
Refer to Cleaning the Fabric Steam
Press section on page 8 of this
manual for proper procedure.
Troubleshooting