SF-710 MINI STEAM IRON OWNER’S GUIDE
IMPORTANT SAFETY INSTRUCTIONS This owner’s guide and any additional inserts are considered part of the product. They contain important information about safety, use and disposal. Before using the product, please familiarize yourself with all operating and safety instructions. Please keep all documents for future reference and pass these documents on, together with the product, to any future owner. See steamfast.com to view, download and print the most current version of these instructions.
product upside down to empty the reservoir. - To reduce the risk of contact with hot water, test whether steam is ready before each use while carefully holding the product away from your body. If no steam appears, wait a few more minutes and test again. Do not look into the appliance, use your hands or other objects to check for steam. - Do not leave appliance unattended while connected. - To reduce the risk of electric shock, do not immerse the appliance in water or other liquids.
- - - - unit is not operating normally. Immediately unplug and have unit serviced by qualified service personnel. When filling Water Tank, only water should be used in unit - other cleaning agents could damage unit or cause injury. Distilled or de-mineralized water is highly recommended, in order to minimize potential build-up of mineral deposits. Do not overfill unit. Do not attempt to use steam function without properly filling Water Tank.
- This appliance has a polarized plug (one blade is wider than the other.) To reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. - The iron is not intended for regular use (for travel irons). - Use appliance only for its intended use.
Product Information UNIT FEATURES & ACCESSORIES 1 2 3 4 5 6 7 8 9 10 11 12 Ironing Plate Main Body Heating Indicator Light Water Tank Cap Water Tank View Window Water Tank Continuous Steam Switch Temperature Control Dial Steam Burst Button Handle Handle Collapse Lever Fill Cup 12 10 9 4 11 5 6 | ENGLISH 3 8 7 6 2 1
1. The Ironing Plate is the heated, non-stick surface that is used to press fabrics, remove wrinkles and create creases. 2. The Main Body contains the unit’s internal heating components 3. The Heating Indicator Light illuminates when the Ironing Plate is heating. It will turn off when the set temperature is reached. 4. The Water Tank Cap covers the Water Tank fill hole. The Cap will “click” when completely shut. 5. The Water Tank View Window lets you monitor the level of water in the Water Tank.
Using the Mini Steam Iron FILLING WATER TANK (FOR STEAM IRONING) 1. Turn off and unplug unit. 2. Place unit on a flat surface and stand the iron upright. 3. Fill the Fill Cup with up to 1.00 oz (29.5mL) of water. Do not fill the Fill Cup to the MAX fill line. It will overflow the Water Tank. NOTE: In order to extend the life of your unit and keep it functioning at it’s maximum potential, it is highly recommended that distilled or de-mineralized water be used in Water Tank. 4. Open the Water Tank Cap.
OPERATING UNIT CAUTION: Do not operate when handle is in collapsed position. STEAM IRONING 1. Follow Filling Water Tank procedure on pg 6. 2. Plug power cord into a convenient electrical outlet. 3. Turn Temperature Control Dial to your desired ironing plate heat setting. The desired setting should align with the Heating Indicator Light. 4. When Heating Indicator Light turns off, the sole plate has reached it’s set temperature. 5.
DRY IRONING IMPORTANT: Make sure Continuous Steam Switch is in the position to avoid water leakage. 1. Plug power cord into a convenient electrical outlet. 2. Turn Temperature Control Dial to desired ironing plate setting. The desired setting should align with the Heating Indicator Light. NOTE: It is recommended to start with lower temperatures first, as high settings designed for heavy materials can damage delicate fabrics. 3.
Storage & Care CLEANING & STORAGE 1. Turn Temperature Control Dial to OFF position. Unplug power cord. 2. Place unit upright to allow Ironing Plate to cool for at least 30 minutes. 3. Open Water Tank Cap and drain any remaining water into a sink or tub. Close Cap when finished. 4. Wipe Main Body and Ironing Plate with a soft cloth lightly moistened with water. • DO NOT clean Ironing Plate with detergents or descalers. • DO NOT clean Ironing Plate with abrasive or corrosive products.
Troubleshooting PROBLEM Unit fails to heat up. POSSIBLE CAUSE & SOLUTION Unit is not plugged in. Plug power cord into electrical outlet. Household circuit breaker / ground fault interrupter has tripped or blown a fuse. Reset circuit breaker / ground fault interrupter, or replace fuse. For assistance, contact a licensed electrician. Temperature Control Dial has not been turned to a heat setting. Unit is leaking water.
Warranty Information 2-YEAR LIMITED WARRANTY What is covered Steamfast, a division of Vornado Air, LLC (“Steamfast”).
• THIS WARRANTY GIVES BUYER SPECIFIC LEGAL RIGHTS. BUYER MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE-TO-STATE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, AND SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO BUYER. How do you register the Warranty Buyer must complete an application to register this Warranty within sixty (60) days following date of purchase.
Steamfast 415 East 13th Street, Andover, KS 67002 1-800-711-6617 steamfast.com consumerservice@steamfast.
