Full Product Manual

ENGLISH
|
3
product upside down to empty the reservoir.
- To reduce the risk of contact with hot water, test whether
steam is ready before each use while carefully holding the
product away from your body. If no steam appears, wait a few
more minutes and test again. Do not look into the appliance,
use your hands or other objects to check for steam.
- Do not leave appliance unattended while connected.
- To reduce the risk of electric shock, do not immerse the
appliance in water or other liquids.
- When placing the iron on its stand, ensure the surface on
which the stand is placed is stable.
- Unit is only meant to be used with recomended accessories.
Using other types of attachments may cause damage to unit
or injury.
- Always disconnect appliance from electrical outlet when lling
with water or emptying, and when not in use.
- Always turn the iron OFF before plugging in or unplugging
the iron from the electrical outlet.
- Do not allow cord to touch hot surfaces. Let appliance cool
completely before putting away. Wrap cord with supplied
"hook and loop" fastener when storing.
- Never yank cord to disconnect from outlet. Instead, grasp just
the plug and pull todisconnect.
- Do not operate appliance with a damaged cord, or if the
appliance has been dropped or damaged. To reduce the risk
of electric shock, do not disassemble or attempt to repair the
appliance. All repairs must be performed by a qualied service
professional. Incorrect reassembly or repair could cause a risk
of re, electric shock, or injury when the appliance isused.
- If Heating Indicator Light does not illuminate when
Temperature Control Dial is turned to a selected heat setting,