SF-295 3-IN-1 STEAM MOP OWNER’S GUIDE
IMPORTANT SAFETY INSTRUCTIONS This owner's guide and any additional inserts are considered part of the product. They contain important information about safety, use, and disposal. Before using the product, please familiarize yourself with all operating and safety instructions. Please keep all documents for future reference and pass these documents on, together with the product, to any future owner. See our website for the most current version of this owner’s guide.
not operate unit if Main Nozzle is blocked. 17. Burns can occur from touching hot metal parts, hot water, or steam. Do not touch Main Nozzle or attempt to connect accessories while unit is in use. Do not touch removable accessories or attempt to change accessories while unit is in use. Use caution when you turn unit upside-down – there may be hot water. 18. Use caution when using unit on uneven surfaces, such as stairs. 19.
Product Information The following features and accessories are included with your 3-in-1 Steam Mop. Carefully inspect the packing material for all parts listed below. To obtain possible missing parts, refer to Product Support on Pages 17 & 18 of this manual.
• The Steam Nozzle (1) emits the flow of hot, penetrating steam. The Mop Head, Jet Nozzle, Fabric Nozzle and Squeegee all connect to the Steam Nozzle. • The Water Tank (2) is the reservoir where water is held before being transferred to the heat exchange and converted to steam. The Water Tank holds 15 oz. (444 ml.) of water. • The Water Tank Cap (2A) covers the Water Tank Fill Hole, and must be removed in order to fill the Water Tank with water. To unlock the Water Tank Cap turn counter-clockwise.
Assembling Your 3-in-1 Steam Mop STEAM MOP SETUP EXTENSION POLE 1. Connect Handle to upper, wider end of Telescopic Pole. To do this, simply slide Handle onto Telescopic Pole until it locks into place (Figure 1-A). 2. Insert lower, narrower end of Telescopic Pole into Mop Body (Figure 1-B). Make sure Release Button aligns with the small hole on Mop Body. Press Telescopic Pole until Release Button snaps through small hole on Mop Body. Telescopic Pole should now be secured to Mop Body.
MOP HEAD CAUTION: Always allow unit to cool before connecting/disconnecting any accessories. 1. Align Mop Head with main unit as shown (Figure 2). 2. Slide Mop Head neck into Steam Nozzle, pressing firmly until release button snaps through hole. 3. To remove Mop Head, press firmly on release button while simultaneously pulling Mop Head away from Steam Nozzle. FIGURE 2 MOP HEAD NECK ± STEAM NOZZLE HOLE RELEASE BUTTON MICROFIBER PADS 1.
STEAM CLEANER SETUP JET NOZZLE CAUTION: Always allow unit to cool before connecting/disconnecting any accessories. 1. Align Jet Nozzle with Steam Nozzle as shown (FIGURE 4). 2. Slide Jet Nozzle into Steam Nozzle, pressing firmly until release button snaps through hole. 3. To remove Jet Nozzle, press firmly on release button while simultaneously pulling Jet Nozzle away from Steam Nozzle.
SQUEEGEE CAUTION: Always allow unit to cool before connecting/disconnecting any accessories. 1. Align Squeegee with Steam Nozzle as shown (FIGURE 6). 2. Slide Squeegee into Steam Nozzle, pressing firmly until release button snaps through hole. 3. To remove Squeegee, press firmly on release button while simultaneously pulling Squeegee away from Steam Nozzle.
Using Your 3-in-1 Steam Mop FILLING WATER TANK NOTE: Do not turn unit upside-down when Water Tank is full - a small amount of water may leak out. 1. Slide the Water Tank Release Button upward (Figure 1) and hold as you remove Water Tank. Pull Water Tank upwards and towards you to remove. 2. Remove Water Tank Cap by unscrewing it in a counter-clockwise direction to unlock. Pull Water Tank Cap out (Figure 2). Fill Water Tank with room temperature water, up to 15 oz. (444 ml.
GENERAL OPERATION NOTE: Be sure that Water Tank has been filled and all desired accessories are connected before following these steps. 1. For first-time use, remove protective plastic cover that is shipped on electrical plug. Plug power cord into a 120V grounded electrical outlet. 2. Press the Power Button to turn the unit On. Power Indicator Light will immediately illuminate to indicate that unit is powered on and heating. Select desired steam setting (Default setting is Level 4).
FABRIC STEAMING CAUTION: When steaming any material for the first time, it is recommended that you test on a small inconspicuous area before proceeding. Do not use on synthetic fabrics, velvet, or other steam-sensitive materials. • Make sure Fabric Nozzle is properly connected. Refer to Page 9 for details. • For general steaming convenience, Extension Pole should be removed so that unit functions as a handheld fabric steamer. • Follow General Operating Instructions on Page 11 to begin steaming.
APPLICATIONS Below is a listing of some possible applications of the 3-in-1 Steam Mop. These are intended to provide some general guidelines as you become more familiar with your steamer. You will likely discover a wide variety of other uses around your home.
GENERAL STEAMING TIPS You will find nearly limitless uses for your 3-in-1 Steam Mop. There are no rules when it comes to steam cleaning and/or the attachments you received with your unit. Use whichever attachment seems to accomplish the intended job quickly and easily. Below are a few starting guidelines: • Many surfaces only require to be sprayed with the Jet Nozzle to clean and disinfect them, then wiped with a clean dry cloth, towel, or paper towel.
Storage & Care PROPER STORAGE Preparing your 3-in-1 Steam Mop for storage is quick and simple. When you have completed your tasks, follow the steps listed below. 1. Press Power Button to Off (the red Power Indicator Light will turn off), and unplug power cord. 2. Allow unit time to cool (at least 5 minutes). 3. Remove all attachments and accessories from unit. 4. Remove Water Tank Cap and drain any remaining water from Water Tank into a sink or tub to minimize potential mineral build-up.
Troubleshooting PROBLEM Unit fails to heat up. Heating Indicator Light DOES illuminate. POSSIBLE CAUSE SOLUTION Unit is not plugged in. Plug power cord into electrical outlet. The Power Button is pressed Off. Make sure the Power Button is pressed to turn the unit On, and Power Indicator Light is illuminated. Household circuit breaker / ground fault interrupter has tripped or blown a fuse. Reset circuit breaker / ground fault interrupter, or replace fuse.
Product Support CONSUMER SERVICES For problems with your 3-in-1 Steam Mop, please refer to the troubleshooting guide located on Page 16 of this manual. Additional inquiries should be directed to our consumer support services through our Web site, www.steamfast.com. If you do not have internet access, you may also contact our Consumer Service Department by telephone, at 1-800-711-6617.
ACCESSORIES & PARTS When ordering accessories and parts for your 3-in-1 Steam Mop, you may refer to the part numbers below. Replacement parts may be ordered through our Web site: www.steamfast.com You may also contact Consumer Service directly: consumerservice@steamfast.
Warranty Information 2-YEAR LIMITED WARRANTY What is covered Steamfast, a division of Vornado Air, LLC (“Steamfast”).
Warranty Information THEORY OF LAW. • THIS WARRANTY GIVES BUYER SPECIFIC LEGAL RIGHTS. BUYER MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE-TO-STATE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, AND SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO BUYER.
Steamfast 1-800-711-6617 415 East 13th, Andover, KS 67002 steamfast.com consumerservice@steamfast.
