Specification Sheet

3¾"
ENOCILIS
R
A
ELC
.
Z
O.
LF
2
/
1
te
N
0
25
1
3
.
oN
m
e
t
I
.
A
.
S
.U
NI
E
D
A
M
Silicone Sealant
360-Degree Diffusing
Steamhead
6-Pin Coupler
3¾"
4"
4"
Dimensions: TSC-250 = 3¾" x 3¾", TSC-250R = 4" round
Package Includes: Control, 6-Pin Coupler, Steamhead,
Silicone Sealant, Installation and Operating Instructions.
Required Electrical Service:
Low-voltage connection from TSG or SMP steam generator
via multi-conductor cable (supplied with steam generator).
Specications
04/17
Pub. No. 277-C
Steambath Control Model: TSC-250 and TSC-250R
- 1 -
TSC-250R - Round
Product Information – TSC-250 and TSC-250R
2 years parts warranty
Programmable Time and Temperature.
Temperature range 60ºF min to 125ºF max.
Time up to 60 minutes.
Does NOT operate AromaSense, AudioSense, ChromaSense
and ShowerSense options.
Digital display of ambient, set temperature, and elapsed time.
2 User profiles
● Selectable InstaMist (when used with TSG generators)
Notes
Package Contents
Installation Notes:
Surface Mount - 1½" hole required.
Mounts inside the steam room.
Steamist recommends that the multi-conductor cable be run
through ¾" conduit to protect cable from damage and to facilitate
easy replacement.
Mount control near seating area and not above steamhead.
Rough-in Notes:
Control should be mounted 48" above the floor.
Steamhead to be mounted 12” to 18" above the finished floor or
6" above the rim of the tub and as far from the seating area
as possible.
Product No. - Finishes:
PC - Polished Chrome
PN - Polished Nickel
BN - Brushed Nickel
PB - Polished Brass
ORB - Oil-Rubbed Bronze
TSC-250
®
21
2
1
STOP
X
MENU
__
__
__
__
(TSC-250R ships with a Round Steamhead)
STOP
X
MENU
__
__
__
__