Specification Sheet

Front View
2"
1⅝"
2⅜"
3½"
¼"4
2¾"
Side View
Supplied with Conduit
and (2) Connectors
Specications
Specifications – AD-900
Electrical Information: Connects to a factory installed Auto
Drain terminal block, located inside the Generator cabinet.
Product Information: Normally Closed (N/C).
Inlet & Outlet - ½" NPT Brass female thread.
Installation Notes: Valve should be installed with arrow on
cover pointing away from Generator. Pipe Auto Drain outlet to
empty into floor drain. Outlet must have a minimum air gap of
twice the diameter of the Auto Drain pipe.
Product No. - Description:
9070 - To be used with 240v generators
9071 - To be used with 208v generators
10/16
Pub. No. 306-B
Auto Drain
Auto Drain
Dimensions
Model: AD-900
Application Information
For use with only the following model steam generators:
TSG-7, TSG-10, TSG-12, and TSG-15 (ALL Serial Numbers).
SM-5, SM-7, SM-9, SM-10, SM-11, SM-12 and SM-15 (ONLY with Serial Numbers 1,030,000 to 2,000,000).
®
East Coast Office: 25 E. Union Ave., East Rutherford, NJ 07073 • Tel: [phone] • Fax: [phone]
West Coast Office: Tel: [phone] • Fax: [phone]
®