Installation Guide

SteamSpa PHONE: [phone] FAX: [phone] http://steamspa.com [e-mail]
Page 21
INSTALLATION & USER GUIDE
LED LIGHT
FUNCTIONS
OPERATIONAL APPROACH
BLUETOOTH
STEAM
CHROMA LIGHT
1. START-UP/SWITCH OFF
POWER ON
START-UP
The control panel will BEEP when it’s connected to a power source.
When the system is under stand-by mode, press the key to start-up. The current
ambient temperature in the room and bluetooth music icon will be displayed on the
screen as shown in Figure 1. After the interface is fully displayed, press the function
key on the screen to unlock.
If a user has set the a scheduled start up function, when the secduled time arrives, the
system will start-up automatically and begin the process of producing steam.
Press the key to power down the control panel and enter standby mode. During this
mode the clock will be displayed on screen.
The system will power-off automatically when the pre-set time is reached. (The
system will be shut down after 2 minutes of the steam function closed.)
POWRE-OFF
2. Control of White LED Light (If Equipped)
After power-on, the lighting section interface is shown in Figure 4 as follows: Press
to turn on the light ; Press to turn off the light.
3.Control of Color Changing Light (If Equipped)
When the system is power-on, enter in the lighting interface as shown in Figure 4:
Press key to turn on the Color-Changing light, and then press key to
change the color of the light. Press the key to turn off the Colored-light Function
after the color-changing light function is started.