Installation Guide

SteamSpa PHONE: [phone] FAX: [phone] http://steamspa.com [e-mail]
Page 27
INSTALLATION & USER GUIDE
PROBLEM POSSIBLE CAUSES SOLUTIONS
Receiving an error “E1” on the control
panel
1. The signal that transfers between
the control panel and generator has
a problem
1. Check the connection on the control
cable to make sure all 13 pins are
functional
Receiving an error “E0” on the control
panel 1. Lack of water in the tank
1. Check the connection on the control
cable to make sure all 13 pins are
functional
The control panel shows the
temperature, but does not go on
1. The water level sensor cable or the
cable from the relay to element is
loose
1. Make sure all cables to the heating
elements are well connected