Instructions / Assembly

SteamSpa PHONE: [phone] FAX: [phone] http://steamspa.com [e-mail]
Page 22
INSTALLATION & USER GUIDE
TESTING THE MACHINE
1. Press the power button, , and the control panel will display the room’s temperature and the water inlet valve will open up to
allow the correct amount of water into the generator to begin producing steam.
2. The generator must be operating in order to turn the light on or off. (Light sold separately)
3. After starting the generator steam production will begin in a short while and will continue until the set temperature is reached.
Afterwards production will restart when the room temperature begins to fall.
4. 10 minutes after the generator is shut off the Auto Drain will automatically open and allow the water to drain out for
approximately 7 minutes.
WARNING! Do not touch the safety release valve while the generator is running.
CONTROL PANEL DIAGRAM
1. TEMP DISPLAY SCREEN
2. TIME DISPLAY SCREEN
3. TIME/TEMP DECREASE
4. TIME/TEMP INCREASE
5. TIME/TEMP SET
6. MEMORY
7. LIGHT ON/OFF
8. POWER ON/OFF