Full Product Manual

If the aroma oil fails to be injected into the steam room, it is recommended to carry
out following inspections:
a. Check whether the switch pump A, pump B is started:
b. Check liquid of the aroma oil container;
c. Check whether the pump is running;
d. Check whether the conveying hose is bent, knotted or cracked; if yes, straight it or
replace.
Inspection and repair of failure
Warnings: To avoid any injury caused by electric shock, unplug the power plug before the repair.
1. The controller fails to display: Check whether the switching power supply is powered by power supply and whether the
output voltage is normal. In case of damage of switching power supply, please contact your dealer or manufacturer.
2. If the voltage input to the controller is normal without display, the controller may be damaged. Please contact your dealer or
manufacturer in such event.
3. If the control panel of the aroma pump is in normal display, the motor of the pump head rotates, but the roller not, you can
pull the output hose of the pump head, so as to help the pump head start again. Refer to the Figure 10.
Technical data and figure
Power supply: 110V-240V 50/60HZ
Motor voltage: 11VDC
Power: ≤10W