Full Product Manual

Installation of double pump SS-DAP001-XX/ single pump SS-SAP001-XX:
When use the SS-BCT01BK control panel, you can connect the control line of the aroma pump with the control line from the
sound box of SS-BCT01BK.
We should install the aroma pump as the following steps:
Installation of double pump SS-DAP001-XX:
1. First, the aroma pump should be fixed on the wall.
2. Second, install 3/4" three-way valve on the steam pipe.
3. Third, connect the silicone tube of aroma pump with the aroma oil injection port of 3/4" three-way valve.
4. Connect the control line of aroma pump with the relevant control line from the sound box.
5. Refer to the above-mentioned methods and install the temperature controller switch.
6. After the aroma diffuser is powered on, it is in standby mode, and the controller of aroma diffuser will display "- -"; when
the steam engine is in the heating state, you can operate the steam engine controller to turn on / off the aroma system.
Installation of single pump SS-SAP001-XX:
1. First, the aroma pump should be fixed on the wall.
2. Second, install 3/4" three-way valve on the steam pipe.
3. Third, connect the silicone tube of aroma pump with the aroma oil injection port of 3/4" three-way valve.
4. Refer to the above-mentioned methods and install the pneumatic switch on the wall.
5. Refer to the above-mentioned methods and install the temperature controller switch.
6. The aroma diffuser will be in standby mode if its power cord plug is inserted into the socket providing power to it, and the
controller of aroma diffuser will display "- -"; when there is steam passing through the steam pipe and the temperature is
higher than 190℉, the temperature controlled switch will automatically open, so that you can operate the pneumatic switch
button to turn on / off the aroma system.
Notice: The aroma pump system stops running when the temperature of steam pipe is lower than 190℉.