Operation Manual

∙ Never immerse the appliance in water.

∙ Do not operate the appliance if it is damaged, e.g. it fell down,

or it is damaged in any other way.

∙ Repairs at the appliance, e,g, exchange of a damaged power

cord, must only be done by authorized service persons, to avoid

any dangers.

∙ The appliance becomes hot. Do not move the appliance until it

cooled down

∙

Attention! Housing get hot. Danger of burns! Do

not place the appliance on a sensitive surface (e.g. pain-

ted furniture) and keep a distance of at least 70cm to

burnable materials.

Cleaning and maintenance

∙ Clean after every usage.

∙ Unplug the device.

∙ Never immerse into water.

∙ Leave the device to cool. Cleaning is easiest when the device is

lukewarm.

∙ Clean with a damp cloth.

Operation

∙ Unwind the cable

∙ Only use the appliance according the instructions on the rating label. The red lamp

shines

∙ Set the thermostat to the desired temperature. The green lamp shines, the device

heats.

∙ At the initial heating, the device can smoke slightly. After a few minutes the smoke

clears away.

∙ If the desired temperature is reached, the green light goes out. According to the

recipe, add small quantities of dough on the device.

∙ During the cooking time, the green light will turn off and on again. The thermostat

works.

∙ If the crepe is ready, remove it only with a wooden or plastic spatula so that the

coating will not get damaged.

∙ When the green light goes out, you can enter the next small quantity of dough

onto the device.

∙ The appliance is not suitable for roasting meat.