Operation Manual

Working place:

∙ Place this device on a even and stable surface. Do not place the device

near objects that may be sucked in (such as curtains)

Do not place the device directly in front of people or animals. ∙

For your health’s sake, please select the correct air speed. ∙

Keep a minimum distance of 30cm from any metal object (e.g. radiators). ∙

Safety instructions when using the device:

Always connect the device to a safety socket ∙

Do not use the device unless it is fully assembled. ∙

Route connecting cable in such a way as to avoid unintentional contact or pulling ∙

during operation.

Unplug device from socket before moving its location. ∙

Disconnect mains plug after use and before cleaning. ∙

Operation

Only use the provided power cable ∙

The connecting socket is in the swivelling stand ∙

Start the device using the on/off button ∙ .

The electrostatics may generate a little noise when the equipment is first used. ∙

The air speed is adjusted using the ∙ button.

The wavy lines show which setting has been selected (Min = ∙ , Max = ).

Silent mode: ∙ By pressing the for the fourth time the ON/OFF button is still

illuminated, but the symbols not.

The electrostatic propulsion creates a little airflow, although the fan is not working.

Another pressing of the button is restarting the fan with the lowest speed .

∙ appears when the filter requires cleaning.

∙ appears if the filter is still damp after cleaning and dries within 2 hours.

The blow-out angle can be adjusted by 360 degree rotation. ∙

Switch the device off using the on/off button ∙ after use

Cleaning and maintainance:

Unplug the device. ∙

∙ Never immerse the device in water!

To remove the filter, swivel the outlet opening vertically downwards. The filter can ∙

be lifted out from above using the recessed grips. Carefully brush off the slats using

the provided brush next to the connecting contacts.

The slat part can be rinsed with warm water. ∙

Then dry thoroughly and re-insert. ∙

The intake and outlet grilles can be vacuumed with a vacuum cleaner. ∙

Brush