Information

Connecting energy meters to StecaGrid coolcept / coolcept³
inverters
WIM Version: 11/11/2016
Connecting energy meters to StecaGrid coolcept / coolcept³ inverters
Page
3
of
14
3 Energy meter configuration
If the energy meters listed below are used with their respective factory settings then no settings need
to be made in the energy meter configuration menu. If the factory settings are changed then the
following settings must be adjusted at the energy meter.
Menu item Settings
Address
See energy meter
Baud rate
See energy meter
Parity
See energy meter
Stop bits (quantity)
See energy meter
Please note: Information on operating the respective energy meter is provided in the
latest version of the manufacturer's installation and operating manual!