User manual

3.3.3 Settings
Numerical settings
When performing numerical settings of remuneration and dates, the following applies:
Remuneration
n Possible currencies: £ (Pounds), € (Euros), kr (Krones), none.
n The maximum value that can be set for remuneration is limited for technical reasons. The remu-
neration must be set using different units as required. Example: Dollars instead of Cents (set
currency to none ).
①
Designation of the numerical setting
②
Value to be set; the selected value to be set is highlighted in black.
Date
When setting the month/year, a check is performed to ensure that the selected day is valid. If not,
then the day is automatically corrected.
Example: 31.02.2011 is corrected to 28.02.2011.
Selection of the measurements
Selection of the measurements to be shown in the status display. The following measurements can
be selected:
n Output power: Inverter output power
1)
n Current day yield: Day yield since 0:00
n PV voltage: The voltage supplied by the PV generators
n PV current: The current supplied by the PV generators
n Grid voltage: Voltage at the inverter connection
1)
n Grid current: The current fed into the mains grid
n Grid frequency: The frequency of the public grid
n Internal temperature: Internal temperature of the inverter
n Derating Reason for derating
2)
n Max. daily power: The maximum power supplied in the current day
3)
EN
747.431 | Z09.3 | 2017-09-05 19