User manual

u Screw the mounting plate to the mounting surface using 4 screws:
n Use screws (and dowels etc.) appropriate for the weight of the inverter.
n The mounting plate must lie flat on the mounting surface and the metal strips at the sides must
point forwards (Fig. left).
n Install the mounting plate vertically with the retaining plate ① at the top (example in Fig. left).
NOTICE!
With coolcept-x, you can secure the inverter with a padlock against theft or unauthorized
removal. The padlock is inserted in a shackle which will lock into the retaining plate during
mounting. Now, it is no longer possible to unlock the retaining plate.
NOTICE!
For more information on determining the optimum position for the mounting plate, refer to
the Brief Installation Instructions comprised in the delivery, and to the Appendix under
Mounting.
For Australia only: Cover the Protection class II symbol on the type plate.
Notice
When the inverter is used in Australia, the national regulations do not permit the Protection
class II symbol to be displayed on the type plate.
EN
747.431 | Z09.3 | 2017-09-05 37