User manual

Reactive power
NOTICE!
The following items are only displayed when the use of a reactive power characteristic curve
is prescribed for the country currently selected in the Country item:
– Mode: Type of characteristic curve
Select one of the following types:
- cos phi = 1
- Q(P)
- Q(U) linear
- Q(U) hysteresis
– Loading defaults
1)
: A default characteristic curve can be selected here.
– Node 1
1)
No. of nodes
1)
The nodes provide for free programming of a characteristic curve.
– Node 2
1)
– Node n
1) 2)
– Display char. curve
1)
: Not indicated with mode cos phi = 1.
2)
: Is only displayed when no. of nodes has been set to a value > 2.
1. Press SET to call up the item.
2.
Press rs to select a type of reactive power characteristic curve.
3. Press SET.
ð
The reactive power characteristic curve type is adopted.
4. Press ESC.
✓ The check list is shown.
EN
747.431 | Z09.3 | 2017-09-05 48