User manual

Node n
NOTICE!
P % cannot be changed at the first and last nodes (000 %, 100 %).
1.
Press rs to select a parameter for the node.
2. Press SET.
ð
The parameter value flashes.
3.
Press rs to change the value.
4. Press SET.
ð
The change is adopted.
5. Repeat steps 1 to 4 for the other parameters.
6. Press ESC.
✓ The check list is shown.
Display char. curve
1. The previously set reactive power characteristic curve is displayed graphically (example in Fig.
left).
2. Press ESC
✓ The check list is shown.
EN
747.431 | Z09.3 | 2017-09-05 50